Easyscriber engrave attachment for Hypertherm torch's
 

Still working on fundraiser sign, would like some help

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
Post Reply
DJC
Elite Contributing Member
Elite Contributing Member
Posts: 35
Joined: Mon Dec 11, 2017 11:25 am
Contact:

Still working on fundraiser sign, would like some help

Post by DJC » Mon May 14, 2018 10:36 am

Making a sign for our activities dept fundraiser. They would like me to use there actual logo. Could some please help me convert this to being cut ready? Thanks-
Attachments
mc logo.png

MrsSavage
Elite Contributing Member
Elite Contributing Member
Posts: 85
Joined: Thu Aug 24, 2017 7:00 pm
Contact:

Re: Still working on fundraiser sign, would like some help

Post by MrsSavage » Mon May 14, 2018 12:14 pm

Hope this helps. It needs some bridging done and some cleanup, but hopefully a good start.
Attachments
Fundraiser - MC.dxf
(198.61 KiB) Downloaded 5 times

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 3432
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla
Contact:

Re: Still working on fundraiser sign, would like some help

Post by acourtjester » Mon May 14, 2018 12:49 pm

here is what I came up with, I would make in 2 parts. One being the background with thew letters and the other the rider.
KC 1.jpg
KC rider.jpg
KC rider.jpg (5.55 KiB) Viewed 134 times
KC rider.svg
(8.6 KiB) Downloaded 4 times
KC outline.svg
(5.16 KiB) Downloaded 3 times
KC rider.dxf
(60.4 KiB) Downloaded 11 times
KC outline.dxf
(38.08 KiB) Downloaded 5 times
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

sphurley
Elite Contributing Member
Elite Contributing Member
Posts: 439
Joined: Sat Jul 04, 2015 10:43 pm
Contact:

Re: Still working on fundraiser sign, would like some help

Post by sphurley » Mon May 14, 2018 2:31 pm

Letters separated
MCLogofiles.dxf
(94.01 KiB) Downloaded 9 times
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX

beefy
Posts: 1325
Joined: Fri Jan 18, 2013 3:19 am
Contact:

Re: Still working on fundraiser sign, would like some help

Post by beefy » Mon May 14, 2018 6:17 pm

Take your pick and scale to suit.
mc logo.dxf
(133.12 KiB) Downloaded 5 times
8 x 5 water table
Powermax 1250 with Duramax torch
UCCNC controller, UC400-ETH & UC300-ETH motion controllers.
Sheetcam
Geomagic Design 3D solid modelling
Coreldraw X5

DJC
Elite Contributing Member
Elite Contributing Member
Posts: 35
Joined: Mon Dec 11, 2017 11:25 am
Contact:

Re: Still working on fundraiser sign, would like some help

Post by DJC » Tue May 15, 2018 9:13 pm

Thanks for the help! I am slowly learning but getting some help along the way is a huge benefit!

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests