New member here. Just wanted to introduce myself to the community.
I just picked up a small Swifty plasma table and am still working my way through Draftsight and Inkscape....
I'm kinda clueless with CAD. I needed the table to cut parts for some assemblies I build for a company I do work for as a side gig.
Hello!
Hello, new member here.
- rdj357
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Hello, new member here.
Welcome to the forum, lots of good information here! I'm not an inkscape user but there are plenty here that should be able to help if you hit a snag.
Robert Johnson
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
- rrossetti
- 1.5 Star Member
- Posts: 26
- Joined: Thu Apr 17, 2014 4:34 pm
- Location: uk
- Contact:
Re: Hello, new member here.
hi whats the swifty machine like? and do they give you training on cad
- Ironken
- 3 Star Member
- Posts: 322
- Joined: Thu Nov 30, 2017 7:29 pm
Re: Hello, new member here.
Thank you, rdj!rdj357 wrote:Welcome to the forum, lots of good information here! I'm not an inkscape user but there are plenty here that should be able to help if you hit a snag.
- Ironken
- 3 Star Member
- Posts: 322
- Joined: Thu Nov 30, 2017 7:29 pm
Re: Hello, new member here.
It is a 2x2 hobby machine. They do not train on CAD but have videos on their CAM programs. Welders Supply in Louisville, KY sells these tables if you are in the US.rrossetti wrote:hi whats the swifty machine like? and do they give you training on cad
https://swiftycnc.co.uk/shop/packages/s ... ting-table
-
- 3.5 Star Member
- Posts: 681
- Joined: Wed Nov 26, 2014 5:12 pm
Re: Hello, new member here.
Welcome to the site!!!!!!!!
-
- 2 Star Member
- Posts: 85
- Joined: Sat May 23, 2009 11:41 pm
Re: Hello, new member here.
Welcome
- Ironken
- 3 Star Member
- Posts: 322
- Joined: Thu Nov 30, 2017 7:29 pm
Re: Hello, new member here.
Thanks for the warm welcome, guys! I did not see that there were more replies......no email notifications on this forum? Or am I missing a setting in my profile?
- djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1958
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: Hello, new member here.
Above the first post next to the post reply button (or at the bottom as well) there is a little wrench icon where you can subscribe or unsubscribe to the post.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)