Cannot connect to update server error

SheetCam related questions and tips can be posted here
Post Reply
User avatar
edclayton1
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Thu Sep 25, 2014 10:57 pm
Location: Rathdrum, Idaho

Cannot connect to update server error

Post by edclayton1 »

Anyone know why most of the time I cannot use the SheetCam update feature. Attached is the dialog message that I get when I try to update my SheetCam. Then once in a while when I simply open SheetCam it decides it wants to do an update. Otherwise how can I update my system without losing all my settings is another question I would like to ask? Especially if that computer is not connected onto the internet. :o
Attachments
sheetccam msg.JPG
Home Built 4 * 8 table
Bladerunner
Miller Syncrowave 250 TIG welder
Miller 211 Wirefeed Welder
Bridgeport Mill
Jet 13 * 40 Lathe
Hypertherm Powermax 65
80 gal 2 stage 175 PSI Emax air Compressor
User avatar
djreiswig
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1929
Joined: Thu Nov 19, 2015 10:02 pm
Location: SE Nebraska

Re: Cannot connect to update server error

Post by djreiswig »

Just download the file from the site and install it. I've done this a few times on my non-internet connected computer and it doesn't lose the settings.
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
User avatar
edclayton1
2.5 Star Member
2.5 Star Member
Posts: 123
Joined: Thu Sep 25, 2014 10:57 pm
Location: Rathdrum, Idaho

Re: Cannot connect to update server error

Post by edclayton1 »

Thanks I will give it a shot now. I appreciate the info. Cheers,
Home Built 4 * 8 table
Bladerunner
Miller Syncrowave 250 TIG welder
Miller 211 Wirefeed Welder
Bridgeport Mill
Jet 13 * 40 Lathe
Hypertherm Powermax 65
80 gal 2 stage 175 PSI Emax air Compressor
tcaudle
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1353
Joined: Tue Feb 28, 2012 6:47 pm

Re: Cannot connect to update server error

Post by tcaudle »

Down load to memory stick and copy file to SheetCAM PC unzip and run the installer. It sees older versions and does not change the settings.

If its a LINUX system follow the instructions on the ShhetCAM downloads page for the Linux version. You can also get details on the CandCNC Support Forum.
Post Reply

Return to “SheetCam”