Table decision

For general topics and questions that do not fit into any of the other categories or forums.
Post Reply
Alpiner
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Mon Jan 08, 2018 4:21 pm

Table decision

Post by Alpiner »

Hi,
I am in Australia and looking at buying a table hoping to do a bit of work from home, I am thinking most of my work would be with lighter material maybe the occasional 3/8th so I was planning on a Hypertherm 45 (single phase power only)

I would really appreciate your advice on a few of the tables I have narrowed it down to

TIA
John
FE051229-5173-41F3-BE10-B216DA6D01AF.png
8AE29C6C-E1B5-4B75-BDC4-52F85A4DD8EC.png
369F32B9-F75F-4F9A-8957-58BF43515087.jpeg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Alpiner
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Mon Jan 08, 2018 4:21 pm

Re: Table decision

Post by Alpiner »

This is another one I looked at, Chinese I am pretty sure
E371E9D5-B6AA-42DD-A6E3-664A4617B5CD.jpeg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Mtw fdu
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 269
Joined: Sat Dec 20, 2014 3:12 am
Location: Barossa Valley, South Australia

Re: Table decision

Post by Mtw fdu »

John

I am in Australia as well and have the Powermax 45 myself.

I have had my power updated with 10mm cable from my main power box from the house to my shed and use 2 15 amp power plugs at the same time (1 for plasma and the other for air compressor). I have had no issues with also cutting 12mm (on odd occasions) as well.

My power was only 4mm cable which would not hold up so I went with the extra than 6mm than first planned.

Even though I have dealt with Machinery House with other machinery I went to the USA to get my table as I had a smaller budget.

Hope this helps.


Mtw fdu.
Camcutcnc 4 x 4 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs
Alpiner
1/2 Star Member
1/2 Star Member
Posts: 5
Joined: Mon Jan 08, 2018 4:21 pm

Re: Table decision

Post by Alpiner »

Thanks mate I ended up buying a plasmacam DHC 2 with a Hypertherm 45, now I hope I don’t have to update my power to the shed
Mtw fdu
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 269
Joined: Sat Dec 20, 2014 3:12 am
Location: Barossa Valley, South Australia

Re: Table decision

Post by Mtw fdu »

Keep us posted when it arrives and you are making sparks.

Mtw fdu.
Camcutcnc 4 x 4 plasma cutter with UC 100 Motion Controller
Powermax 45 with Machine Torch
Bobcad V27 and Mach 3
Proma THC
Now with Rotary Axis
Laser cross hairs
Post Reply

Return to “CNC Plasma Cutters General Forum”