Does anybody know where to get replacement "O" rings for the T45m torch.
I haven't seen any listed on the hypertherm site.
T45m torch
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7870
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: T45m torch
Call the tech line, I think I found the one for my torch in the manual showing parts break down, also buy the silicone lube for the O ring. It just needs a small amount but helps alot.
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 5 Star Elite Contributing Member
- Posts: 3087
- Joined: Mon Jul 20, 2009 11:18 pm
- Location: North Carolina
Re: T45m torch
Here is the parts breakdown (copied from the service manual...this is also in the operators manual). The Oring is part number 058503 from Hypertherm, the generic info is: Oring, Viton, .625 x .070" (for sourcing locally). Jim Colt Hypertherm As always.....the service department or customer service at Hypertherm can help with Hypertherm questions! Contact info for both is in your operators manual near the front!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 71
- Joined: Mon Oct 02, 2017 3:39 pm
Re: T45m torch
Awesome, thank you.
Went to the welding supply store they let me take one off one of their machines.
went home and put it on. Wah! Lah! problem solved.
Such a simple thing that causes so much grief.
I ordered a bunch of them so I have extras.
Went to the welding supply store they let me take one off one of their machines.
went home and put it on. Wah! Lah! problem solved.
Such a simple thing that causes so much grief.
I ordered a bunch of them so I have extras.