Always something to be thankful for/ Grateful thankful blessed
-
- 2.5 Star Elite Contributing Member
- Posts: 123
- Joined: Sat May 02, 2015 12:38 pm
Always something to be thankful for/ Grateful thankful blessed
Tis the season to be thankful.... Here are two of my favourites
I cut this one five feet long and they sell like crazy. Nice for over a bay window or something like that. As always check before you cut. It cuts nicely for me most of the time but sometimes when I load it the ends of some of the scrolls flatten. A Corel Draw and my machine glitch I believe.
The grateful thankful blessed cuts nicely about 36" or bigger. Both cut out of 14 gauge.
I cut this one five feet long and they sell like crazy. Nice for over a bay window or something like that. As always check before you cut. It cuts nicely for me most of the time but sometimes when I load it the ends of some of the scrolls flatten. A Corel Draw and my machine glitch I believe.
The grateful thankful blessed cuts nicely about 36" or bigger. Both cut out of 14 gauge.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Always something to be thankful for/ Grateful thankful blessed
Please sir can I have it in DXF or SVG
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2.5 Star Elite Contributing Member
- Posts: 123
- Joined: Sat May 02, 2015 12:38 pm
Re: Always something to be thankful for/ Grateful thankful blessed
At the moment the dxf file is too large to upload. Will try and shrink it down and then I will post.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Always something to be thankful for/ Grateful thankful blessed
You can put them into a ZIP file and post that (Winrar is a free ZIP file maker)
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 3 Star Member
- Posts: 296
- Joined: Wed Apr 01, 2015 10:30 pm
- Location: Watkins, Iowa
Re: Always something to be thankful for/ Grateful thankful blessed
Both those files are BEAUTIFUL!!!! I too would love them in DXF. Thank you for your share.
-
- 5 Star Elite Contributing Member
- Posts: 2636
- Joined: Thu Jul 24, 2008 11:15 am
Re: Always something to be thankful for/ Grateful thankful blessed
Thanks for the awesome share! Here they are converted to dxf for those without Corel. Had to do in 2 individual dxf files, too big all in 1.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3.5 Star Member
- Posts: 547
- Joined: Tue May 25, 2010 11:42 am
Re: Always something to be thankful for/ Grateful thankful blessed
Thanks for sharing.
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Always something to be thankful for/ Grateful thankful blessed
Thanks for the conversion
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: Always something to be thankful for/ Grateful thankful blessed
I cut it last night on a plasmacam 4x4 table. I will go back and do some fine tuning but the file cut as is.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Elite Contributing Member
- Posts: 123
- Joined: Sat May 02, 2015 12:38 pm
Re: Always something to be thankful for/ Grateful thankful blessed
Thanks for posting the dxf. I hadn't had time to get to it. Appreciate the help
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Always something to be thankful for/ Grateful thankful blessed
Thank you for the share, that is very nice.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
- 2 Star Member
- Posts: 62
- Joined: Fri Oct 31, 2014 2:04 pm
Re: Always something to be thankful for/ Grateful thankful blessed
very nice thanks
Homebuilt 2x4 water table
Torchmatecad
Flashcut THC
Hypotherm 45
Torchmatecad
Flashcut THC
Hypotherm 45
-
- 2.5 Star Member
- Posts: 126
- Joined: Wed Apr 24, 2013 8:12 am
-
- 3.5 Star Elite Contributing Member
- Posts: 623
- Joined: Sat Aug 25, 2012 8:08 pm
- Location: Edmonton, Alberta Canada
- Contact:
Re: Always something to be thankful for/ Grateful thankful blessed
Very nice file,
Thank you
Gary
Thank you
Gary
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
-
- 2.5 Star Member
- Posts: 119
- Joined: Sun Feb 14, 2016 10:08 am
Re: Always something to be thankful for/ Grateful thankful blessed
awesome ! Thanks
Hypertherm Powermax 85
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
-
- 1 Star Member
- Posts: 13
- Joined: Fri Mar 03, 2017 4:33 pm
Re: Always something to be thankful for/ Grateful thankful blessed
Any chance you can post these files as svgs? I want to clean them up a bit for sheet cam and give them a try. Really like the design by the way. I'll turn around and post up the cleanup versions when I'm done..... Thank you
-
- 1 Star Member
- Posts: 10
- Joined: Fri Jul 14, 2017 9:42 pm
Re: Always something to be thankful for/ Grateful thankful blessed
very nice, thanks
-
- 2 Star Member
- Posts: 78
- Joined: Sun Jul 26, 2009 11:42 pm
-
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Tue Aug 25, 2015 12:05 pm
- Location: Central MO, USA
Re: Always something to be thankful for/ Grateful thankful blessed
Here you go.jhsenterprises wrote:Any chance you can post these files as svgs? I want to clean them up a bit for sheet cam and give them a try. Really like the design by the way. I'll turn around and post up the cleanup versions when I'm done..... Thank you
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Bulltear 6x12 w/ Proton Z axis & watertable
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
CommandCNC/Linux w/ Ohmic & HyT options
Hypertherm Powermax 85 w/ machine torch
Solidworks, Coreldraw X7, Inkscape, Sheetcam
-
- 2 Star Member
- Posts: 63
- Joined: Tue Aug 22, 2017 9:59 am
Re: Always something to be thankful for/ Grateful thankful blessed
what font is the "Theres always something to be thankful for" sign?
-
- 2.5 Star Member
- Posts: 196
- Joined: Fri Jul 26, 2013 4:56 pm
- Location: northern california
Re: Always something to be thankful for/ Grateful thankful blessed
very nice thank you!
-
- 2.5 Star Elite Contributing Member
- Posts: 123
- Joined: Sat May 02, 2015 12:38 pm
Re: Always something to be thankful for/ Grateful thankful blessed
"what font is the "Theres always something to be thankful for" sign?"
I drew it quite a while ago and never wrote down the font and for the life of me can't find it again. Sorry
I drew it quite a while ago and never wrote down the font and for the life of me can't find it again. Sorry
- ETCWeld
- 3 Star Member
- Posts: 257
- Joined: Sat Dec 16, 2017 10:45 pm
Re: Always something to be thankful for/ Grateful thankful blessed
I was looking for ideas for gifts for next year and saw this.
I am thankful for the file shares
I am thankful for the file shares
-
- 1 Star Member
- Posts: 21
- Joined: Fri Nov 17, 2017 10:25 am
Re: Always something to be thankful for/ Grateful thankful blessed
Look forward to cutting this one. Thank you for sharing and for the conversion to dxf.
-
- 1 Star Member
- Posts: 21
- Joined: Fri Nov 17, 2017 10:25 am
Re: Always something to be thankful for/ Grateful thankful blessed
Look forward to cutting this one. Thank you for sharing and for the conversion to dxf.