Probe ignore activated at call for probe error
-
- 1 Star Member
- Posts: 13
- Joined: Sun Jul 23, 2017 9:16 pm
Probe ignore activated at call for probe error
Can someone help with this? I keep getting this code in the middle of it cutting out stuff. then i cant get it back going in the correct spot so it screws up the whole piece. I just cut something out and worked fine. Did a different piece and started getting this code.
-
- 1/2 Star Member
- Posts: 3
- Joined: Sun May 28, 2017 1:41 pm
Re: Probe ignore activated at call for probe error
I had this problem a month or so back. Turns out my problem was the probe had dirt in the track and was hanging in the on position. I took it apart and gave it a good cleaning and it worked fine.
-
- 1 Star Member
- Posts: 13
- Joined: Sun Jul 23, 2017 9:16 pm
Re: Probe ignore activated at call for probe error
Cool Thanks!
-
- 1/2 Star Member
- Posts: 2
- Joined: Wed Oct 24, 2018 3:51 am
Re: Probe ignore activated at call for probe error
i am using plasma cutter with mech3 software
issue that i am facing is probe ignore status
kindly guide me
issue that i am facing is probe ignore status
kindly guide me