Puerto Rico Police Badge
-
- 1 Star Member
- Posts: 13
- Joined: Sun Nov 30, 2008 2:17 pm
- Location: Melbourne, Florida
Puerto Rico Police Badge
I'm having the hardest time with this file. Can someone please convert this to a clean vector that I could use. It would. S greatly appreciated. I don't usually have a hard time, but this has me doing a lot of work. Thank you in advance.
Melbourne, FL
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Help converting image
You forgot to upload the pic or need to shrink it to fit the forum guidelines, and technically this request should be in the File Conversion Help Wanted forum section, not the sharing section and lastly, if you put the name or description of the file you want help with in the subject line, you might get more interested people to take a look. Sorry to troll, but in the long run, everyone will be more receptive to requests if we all follow these simple steps.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 1 Star Member
- Posts: 13
- Joined: Sun Nov 30, 2008 2:17 pm
- Location: Melbourne, Florida
-
- 1 Star Member
- Posts: 13
- Joined: Sun Nov 30, 2008 2:17 pm
- Location: Melbourne, Florida
Re: Help converting image
hopefuly this uploads
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Melbourne, FL
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Help converting image
Good luck with that...
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 1/2 Star Member
- Posts: 2
- Joined: Thu Nov 10, 2016 1:26 pm
Re: Help converting image
I dont have time to fine tune it but here is a rough translation to .dxf. If i have more time later on i can add stencil text and smooth it out.
-
- 1/2 Star Member
- Posts: 2
- Joined: Thu Nov 10, 2016 1:26 pm
Re: Help converting image
Ive never attached anything so let me know if its visible or not
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7870
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Help converting image
Here is some help using inkscape and the trace "color quantization with a number about 14 colors. Then with it highlighted remove the fill and give it a stroke about 0.010" for thin lines. The break it apart under path to get each item separated so you can delete duplicate lines down to one per item.
I would make it a multi-layer with cutting the letter to be put on top of the shield and make the people separate too. If you play with the number you can change the detail of the items when you have them separate copy them to another inkscape page and work on other parts to get them better then copy them to the other page to. making the original larger helps to separate the items too.
have fun
I would make it a multi-layer with cutting the letter to be put on top of the shield and make the people separate too. If you play with the number you can change the detail of the items when you have them separate copy them to another inkscape page and work on other parts to get them better then copy them to the other page to. making the original larger helps to separate the items too.
have fun
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1 Star Member
- Posts: 13
- Joined: Sun Nov 30, 2008 2:17 pm
- Location: Melbourne, Florida
Re: Help converting image
That's about the same results that I have as well using Inkscape. Thank you for trying
Melbourne, FL
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7870
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: Help converting image
It can be done if you spend a little time on it. Here are some of the things I have assembled from a drawing. They have a background and then separate parts painted and attached to the background for a layered effect.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Help converting image
Try this one. You'll have to add the text.
- RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: Help converting image
Did the badge I posted work for you?
-
- 1.5 Star Member
- Posts: 30
- Joined: Wed Mar 22, 2017 7:32 pm
Re: Help converting image
Anybody know how to do a DXF file single layer for the Miami hurricanes ibis ?