It's happen again LOL
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
It's happen again LOL
Can't wait for a like button or something to that effect. A fairly new Member with 42 post, 41 of them today saying thanks for the share, Some of the files commented on were 7 years old some maybe older and some of the members are no longer with us. Don't take this wrong, All's good with thanking someone for their hard work, it just adds pages for post for the rest of us to go through. I guess this wouldn't happen if I didn't have my preferences set to new post but that's the best way to make sure I see all new post.
Not signing this one.
Not signing this one.
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: It's happen again LOL
Saw that this morning!! LOL
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: It's happen again LOL
I think it is great that people say thank you for sharing. Lack of appreciation is the worlds biggest crime.
I just look at the right side and you can see the name of the person that posted the last post in that thread. When the list gets blown up, after one or two I know which threads to skip by just from looking at the name.
Don't slam someone for being respectful....there is never enough of that in the world today and we need all we can get.
I just look at the right side and you can see the name of the person that posted the last post in that thread. When the list gets blown up, after one or two I know which threads to skip by just from looking at the name.
Don't slam someone for being respectful....there is never enough of that in the world today and we need all we can get.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
- John Frantum
- 2.5 Star Member
- Posts: 156
- Joined: Fri Apr 01, 2016 6:42 am
Re: It's happen again LOL
I don't mind all the thanks, but there's been a few times where I had asked for help finding a file that the feed was blown up, and my request was sent to the bottom of the queue.
That was a bit irritating.
That was a bit irritating.
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: It's happen again LOL
Sure did I think it three times now!
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
-
- 2 Star Member
- Posts: 81
- Joined: Fri Aug 28, 2015 3:17 pm
Re: It's happen again LOL
I would like this comment if it had a like button...just sayingGamelord wrote:I think it is great that people say thank you for sharing. Lack of appreciation is the worlds biggest crime.
I just look at the right side and you can see the name of the person that posted the last post in that thread. When the list gets blown up, after one or two I know which threads to skip by just from looking at the name.
Don't slam someone for being respectful....there is never enough of that in the world today and we need all we can get.
D.I.Y 4x4 CNC Plasma Table with water tray
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
60 Gal. A/C + D.I.Y Aftercooler + Water/Oil seperator + Desicant air dryer
45XP (CPC with hand torch)
MiniTHC
UCCNC + Sheetcam + Inkscape / AutoCAD
- see&see
- 2.5 Star Elite Contributing Member
- Posts: 218
- Joined: Tue Jun 24, 2014 12:04 pm
- Location: Minden, Nevada
- Contact:
Re: It's happen again LOL
Reminds me, over on the Practical Machinist forum with all of the sore head tired machinists having a bad day if you get ONE like over there I'm here to tell you that you earned it..I would like this comment if it had a like button...just saying
You marry into the PlasmaCam family and must accept the fact your software and hardware are proprietary. It's a for better or for worse engagement with overwhelming security. PlasmaCam controls the computer, table, hardware to their advantage IMO.
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2642
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: It's happen again LOL
Perhaps if the same member continues to blow up the list one of the ADMINs should send a PM to that person and link them back to one of these discussions!
Larry
Larry
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: It's happen again LOL
Hey Larry, I'll hit the like button for that!
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2642
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: It's happen again LOL
It still goes on, not sure he even sees these posts.
Larry
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 68
- Joined: Mon Aug 07, 2017 1:31 pm
Re: It's happen again LOL
Maybe posting in that section will yield better results. Now this thread has a relatively useless active thread.
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: It's happen again LOL
7. Members are asked to not act as "back seat moderators". Bring the post to our attention using the report button outlined above.
Sorry admin! Just saying pretty sure he has been notified.
Sorry admin! Just saying pretty sure he has been notified.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber