Easyscriber engrave attachment for Hypertherm torch's
 

Corel Draw cutting arc in straight cuts

Corel Draw Graphics Suite related questions and tips can be posted to this topic.
Post Reply
joeshown
Posts: 6
Joined: Fri Sep 18, 2009 1:29 pm
Contact:

Corel Draw cutting arc in straight cuts

Post by joeshown » Wed Aug 02, 2017 10:44 pm

I have a Tracker 4X8 with the upgraded computer with Corel Draw X3 software. When I draw anything that has an arc such as letters like "G" and "O" it shows up in Command and Cut as a series of short straight lines to form the arc. Any ideas on what needs to be changed in the Corel or Command an Cut software?

Joe Shown

weldguy
Posts: 173
Joined: Fri Apr 17, 2009 11:48 am
Contact:

Re: Corel Draw cutting arc in straight cuts

Post by weldguy » Thu Aug 03, 2017 10:10 am

When you export your plt file be sure the curve resolution is set to .001" See attached image showing the window that will appear when you are exporting. This should do it.
curve.PNG
curve.PNG (16.41 KiB) Viewed 212 times

joeshown
Posts: 6
Joined: Fri Sep 18, 2009 1:29 pm
Contact:

Re: Corel Draw cutting arc in straight cuts

Post by joeshown » Sun Aug 06, 2017 11:21 am

Thanks you very much for taking the time to reply to my question. Your answer was very helpful and resolved the problem

Joe Shown

Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests