I'm trying to cut these for my crossfit class but for some reason the DXF seems to be the wrong type ???? Any help would be greatly appreciated. Does anyone know why? I thought that all DXF's were the same.
Thanks Greg
#ShipyardStrong_12x2 (4).dxf
Strength&Conditioning_12x2 (4).dxf
You currently do not have access to download this file. To gain download access for DXF, SVG & other files Click Here
I couldn't get them to load in Inkscape. Some error about poly lines. I loaded them in Corel X8 and Saved them as DXF. I have issues with some .DXF files. Not sure if it's because of all of the different versions or not. Anyway. These load into Inkscape now. Let me know if you still have issues and we will try something else.
Strength&Conditioning_12x2.dxf
ShipyardStrong_12X_2.dxf
You currently do not have access to download this file. To gain download access for DXF, SVG & other files Click Here
"If you can't find the time to do it right, When will you find the time to do it over?"
LDR Motion Systems 4X4 with scribe
Hypertherm 45
Millermatic 211
Wysong Model 100 Ironworker
Chinese 40" 3in1
Anyone know why there are so many issues with .dxf format? The files I supplied were clean and properly sized when I saved them out of Inkscape. When I open them back up, they are segmented, need smoothing and are way out of scale. When I call them up in Corel, they are segmented and have extra lines in them as well as out of scale. Very frustrating . I try to only work with .svg format because I don't see these type of issues. Is there something that I'm missing or do you guys see these issues too?
"If you can't find the time to do it right, When will you find the time to do it over?"
LDR Motion Systems 4X4 with scribe
Hypertherm 45
Millermatic 211
Wysong Model 100 Ironworker
Chinese 40" 3in1
With Inkscape there are 2 way DXF files can be saved, see attached screen shot. I'm not expert but I have see what you are talking about.
Maybe some with more smarts can tell what the difference is and which you should use.
You currently do not have access to download this file. To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
I was able to open that one with Qcad, Save with a different name In SVG and it looks Ok Opening with inkscape.
Please note I did not put my glasses on.
When I download the Shipyard DXF it doesn't load correctly so, I imported the DXF file into Inkscape saved it as a DXF and only had one line that didn't belong. Removed it and here it is.
You currently do not have access to download this file. To gain download access for DXF, SVG & other files Click Here