a few of my projects
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
a few of my projects
Center piece is a ball cap display and the outside are logos for a different training camps, a retirement present I believe.
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
Re: a few of my projects
Can't claim the paint on this though. A friend of mine does great work on a lot of my work. Ha
- Nacs Fab
- 3 Star Member
- Posts: 328
- Joined: Tue Dec 04, 2012 4:11 pm
- Location: Columbia, MO
Re: a few of my projects
Nice work!
Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
Re: a few of my projects
Not all plasma projects, but this stairway I built a replica staircase to build the railings. Paint done by my buddy on these as well
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
Re: a few of my projects
Rose for the wife, parts cut out of 22 gauge on the table and hammered for hours. Ha
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
Re: a few of my projects
A sign for a friend. I can only claim the drawing and cutting on this one. Pretty creative I thought
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: a few of my projects
nice work. I think the skills needed to make nice railings is really under-appreciated by 99% of folks. I've found a whole new perspective on places like Disney World when I last visited. Miles and Miles of railing work everywhere and pretty much every inch is custom. Thanks for sharing.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
Re: a few of my projects
Thanks!Nacs Fab wrote:Nice work!
yes that first set of railings were sure frustrating at times but I love a challenge! Never been to Disney world but I can only imagine!Capstone wrote:nice work. I think the skills needed to make nice railings is really under-appreciated by 99% of folks. I've found a whole new perspective on places like Disney World when I last visited. Miles and Miles of railing work everywhere and pretty much every inch is custom. Thanks for sharing.
-
- 3.5 Star Member
- Posts: 547
- Joined: Tue May 25, 2010 11:42 am
Re: a few of my projects
Wow great work.
-
- 2 Star Member
- Posts: 76
- Joined: Fri Jul 01, 2011 10:47 pm
- Location: Tulliby Lake Alberta Canada
Re: a few of my projects
Awsome!
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1678
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: a few of my projects
Very nice work
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm
Re: a few of my projects
Thanks guys, digging around for more interesting stuff
-
- 1.5 Star Member
- Posts: 34
- Joined: Sun Dec 15, 2013 9:22 pm