Here are a couple hatchets I drew up, one is a Gerber and I forget who the other was designed by. The internal lines were put there to etch where it was to be ground to.
M48.dxf
Tomahawk.dxf
You currently do not have access to download this file. To gain download access for DXF, SVG & other files Click Here
You currently do not have access to download this file. To gain download access for DXF, SVG & other files Click Here
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill
What thickness are you using for your hatchets, typically everything we cut is .25". Depending on application the thicker can be a bit heavy for others, we get a lot of positive feedback on the .25" more than the negative.
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill