Horse Stall Sign - Oval Design
-
- 1.5 Star Member
- Posts: 26
- Joined: Wed May 04, 2016 3:57 am
Horse Stall Sign - Oval Design
this is a x-mas gift i cant get it to work i yousing q-cad to draw it and star cam to make the dxf.cnc file to the plasma cutter it loks like crap i cant get the lines to close please help me
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: can someone please help me
I only found four open lines. What size did you want it to be?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 1.5 Star Member
- Posts: 26
- Joined: Wed May 04, 2016 3:57 am
Re: can someone please help me
Thanks but this is the problem
-
- 1.5 Star Member
- Posts: 26
- Joined: Wed May 04, 2016 3:57 am
Re: can someone please help me
here is the cuttline
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: can someone please help me
Strange. It opens fine in Inkscape, Corel, Aspire. Can you do a SVG file?
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2642
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: can someone please help me
Try this. I found 6 pieces that were leftover when things were joined, some to small to zoom in on. Should work now.
Larry
Larry
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 26
- Joined: Wed May 04, 2016 3:57 am
Re: can someone please help me
thanks so mutch for helping me i will try it tomorrow
-
- 1.5 Star Member
- Posts: 26
- Joined: Wed May 04, 2016 3:57 am
Re: can someone please help me
hello again it was better but not good if you can maby you could email me the g-code and a see if its better if you want of course my email is beck_blazer@yahoo.se that would be real nice of you. i thank you for all the help sofar best regards daniel backstrom sweden
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: can someone please help me
beck77 wrote:
Wow!! That's a mess.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 3.5 Star Member
- Posts: 563
- Joined: Fri Jan 24, 2014 11:03 pm
Re: can someone please help me
Try this file. I joined all the lines and made it all closed paths and reduced the nodes. If this one doesn't work you must have a setting wrong in the software you are using to generate your machine code. You will need to scale it, since it was huge when I opened it and it's still pretty large.
Shane
Shane
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 26
- Joined: Wed May 04, 2016 3:57 am
Re: can someone please help me
THANK YOU VERY MUCH . It went from 8,000 to 1,500 LINES AND NOW WORKS. I WISH YOU A MERRY CHRISTMAS AND THANKS AGAIN FOR ALL HELP
BEST REGARDS DANIEL BACKSTROM
BEST REGARDS DANIEL BACKSTROM
-
- 1 Star Member
- Posts: 21
- Joined: Wed Jun 24, 2015 9:23 pm
Re: can someone please help me
Hi Shane; I have had the same problem when converting to Vectric, Found that some of the letters in the design did not completely join. Looked a mess.
Great to see help given to others.Thank you. Bill
Great to see help given to others.Thank you. Bill
-
- 5 Star Elite Contributing Member
- Posts: 2636
- Joined: Thu Jul 24, 2008 11:15 am
Horse Stall Sign - Oval Design
Nice design, thank you!
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Dec 19, 2016 5:20 pm
Re: Horse Stall Sign - Oval Design
Beautiful!
-
- 2 Star Member
- Posts: 71
- Joined: Mon Oct 02, 2017 3:39 pm
Re: Horse Stall Sign - Oval Design
thanks, just got my table absolute newbie here
-
- 4 Star Member
- Posts: 1402
- Joined: Mon Aug 30, 2010 5:56 am
- Location: Palm Bch Gardens Fl
- Contact:
Re: Horse Stall Sign - Oval Design
Nice clean up Shane11
1250 hypertherm
4 X 8 Precision Plasma
CandCnC electronics
4 X 8 Precision Plasma
CandCnC electronics