Can anyone help with this? My software doesn't have the capability to put an outline around this so I can cut it in one piece and my Inkscape program isn't acting right. I tried reinstalling it and haven't had any luck yet. Thanks!
4th Gen Firebird Logo
- Larry83301
- 5 Star Elite Contributing Member
- Posts: 2642
- Joined: Tue Oct 27, 2009 6:36 pm
- Location: Twin Falls, Idaho
Re: Help with 4th Gen Firebird Logo
Would this one work?
http://www.plasmaspider.com/viewtopic.p ... ird#p24929
It comes out as a single piece.
Larry
http://www.plasmaspider.com/viewtopic.p ... ird#p24929
It comes out as a single piece.
Larry
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Help with 4th Gen Firebird Logo
Hope this helps
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
-
- 1 Star Member
- Posts: 19
- Joined: Mon Sep 12, 2016 4:30 pm
Re: Help with 4th Gen Firebird Logo
That is exactly what I was trying to do. Thank you!!
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Help with 4th Gen Firebird Logo
Hey Gamelord, I just checked the SVG you posted and the bird in the middle will need to be tied in or it's going to drop out. No offence my friend, you are much better at this than me, just wanted to save someone some time and material.
Rick
Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
- Gamelord
- 4.5 Star Member
- Posts: 1637
- Joined: Wed Aug 29, 2012 5:17 pm
- Contact:
Re: Help with 4th Gen Firebird Logo
I only did the outline. I never know if the person asking is doing vinyl or multi layered pieces. If they are not sure how to tie pieces in then I wonder why they have a plasma table and what they actually do with it.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD
- little blue choo
- 4 Star Member
- Posts: 1460
- Joined: Mon Mar 02, 2015 10:38 pm
- Location: Cherryville NC
- Contact:
Re: Help with 4th Gen Firebird Logo
10-4 I was assuming and you know what that does.
This proverb plays on the fact that the word "assume" may be broken down into the letters "ass", "u", and "me", and is intended to suggest that one should not make assumptions because they may turn out to be wrong and make those involved appear foolish
Will try to think before speaking next time. LOL
This proverb plays on the fact that the word "assume" may be broken down into the letters "ass", "u", and "me", and is intended to suggest that one should not make assumptions because they may turn out to be wrong and make those involved appear foolish
Will try to think before speaking next time. LOL
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape
-
- 5 Star Elite Contributing Member
- Posts: 2636
- Joined: Thu Jul 24, 2008 11:15 am
Re: Help with 4th Gen Firebird Logo
Thanks Gamelord for the conversion and outline, I have a friend who would love one these cut for his shop wall!
-
- 2 Star Member
- Posts: 80
- Joined: Fri Apr 13, 2012 4:38 pm
- Location: Iowa