Harley Davidson firepit
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Harley Davidson firepit
Cut this out of 14 gage. Designing a removable grill out of 14 gage stainless steel. Assembly takes (92) stainless steel button head screws and nuts. Amazingly all the holes lined up perfectly!
Dave Hanks
Dave Hanks
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: Harley Davidson firepit
That looks great! That's a lot of bolts
Think it will warp?
Think it will warp?
Last edited by gamble on Thu Jul 28, 2016 2:23 pm, edited 1 time in total.
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
-
- 2.5 Star Elite Contributing Member
- Posts: 166
- Joined: Thu Jun 16, 2011 9:19 am
- Location: Marshfield, MA.
- Contact:
Re: Harley Davidson firepit
Looks great and a little thicker than 14 ga
If you radius the legs you sell it as a rocking cradle
If you radius the legs you sell it as a rocking cradle
Omax 80X Waterjet 6 x 12 with Tilt-A-Jet
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
CamFive 150w Co2 Laser
Miller Mig & Tig
Whitney-Jenson 20 ton Punch Press
Atlas Lathe
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
It probably will warp. Thought the bends might stiffen it up some. I'll find out when I burn it in.gamble wrote:That looks great! That's a lot of bolts
Think it will warp?
Dave Hanks
-
- 1 Star Member
- Posts: 16
- Joined: Thu Jan 24, 2013 4:31 pm
Re: Harley Davidson firepit
Looks great, I thought it could double as a cradle as well.
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
Had the same thought......or maybe a jack stand for Harleys.....a planter......or a light fixture over a pool table?cross-trax wrote:Looks great, I thought it could double as a cradle as well.
Dave Hanks
- SlagBandit
- 2 Star Elite Contributing Member
- Posts: 67
- Joined: Thu Apr 14, 2011 8:32 pm
Re: Harley Davidson firepit
That is outstanding!!! Great Job!
Torchmate 4x4 Growth Series
Hypertherm Powermax 45
Torchmate 1 5x10
Hypertherm Powermax 85
Miller 225 MIG
Miller 210 Syncrowave TIG
Hypertherm Powermax 45
Torchmate 1 5x10
Hypertherm Powermax 85
Miller 225 MIG
Miller 210 Syncrowave TIG
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
Thanks.....my job is never ending.SlagBandit wrote:That is outstanding!!! Great Job!
Dave Hanks
-
- 2 Star Member
- Posts: 85
- Joined: Mon Aug 06, 2012 9:29 pm
Re: Harley Davidson firepit
That is AWESOME!! Great design. Love the bolts. Are they carriage bolts, or button head cap screws?
5 x 10 Air bladder water table
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
Precision plasma HDB gantry
CandCnC 620-4 Bladerunner
Feather touch ohmic plate sensing
Hypertherm Powermax 65
2015 Autocad lt
Sheetcam
Mach 3
Central California
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
A little paint covers a multitude of sin.....my Dad used to say.
Dave Hanks
Dave Hanks
- Buzzard Gut
- 3 Star Member
- Posts: 364
- Joined: Mon Jun 27, 2011 2:07 pm
- Location: Coos Bay Oregon
Re: Harley Davidson firepit
Wow! that turned out nice Dave! Another fine job!
The older I get, The better it was!
-
- 1 Star Member
- Posts: 17
- Joined: Wed Apr 08, 2015 12:00 pm
Re: Harley Davidson firepit
IS there a file on the site for this one, for some reason I can log in then get bumped off. Any one else having the same issue?
-
- 2.5 Star Member
- Posts: 148
- Joined: Mon Nov 03, 2014 2:04 pm
- Location: Racine Wi
- Contact:
Re: Harley Davidson firepit
pretty brave. have you gotten a cease and desist order yet?
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
Actually.....what I'm looking for is an order approved by Harley Davidson.Corfabrication wrote:pretty brave. have you gotten a cease and desist order yet?
-
- 2.5 Star Member
- Posts: 148
- Joined: Mon Nov 03, 2014 2:04 pm
- Location: Racine Wi
- Contact:
Re: Harley Davidson firepit
I hope it works out for you.DXF wrote:Actually.....what I'm looking for is an order approved by Harley Davidson.Corfabrication wrote:pretty brave. have you gotten a cease and desist order yet?
-
- 1/2 Star Member
- Posts: 5
- Joined: Sun Apr 23, 2017 10:12 pm
Re: Harley Davidson firepit
would you share this dxf?
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Harley Davidson firepit
Sharing a Harlee D logo on this forum should never happen. Frankly, I'm surprised this entire thread hasn't been deleted by the Admin.Voesenekcnc wrote:would you share this dxf?
This is your very first post, which means the rules for joining should be pretty fresh... copyrighted logos are not supposed to be shared on this forum ever.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
I was informed by the Administrator some time back that you can post pics but not dxf files. Almost everything shared on this forum has been copied. I have seen tons of copyrighted dxf files shared on this forum......Batman, Superman, Chevy logos, Ford logos etc. I will not share Harley logo dxf files.Capstone wrote:Sharing a Harlee D logo on this forum should never happen. Frankly, I'm surprised this entire thread hasn't been deleted by the Admin.Voesenekcnc wrote:would you share this dxf?
This is your very first post, which means the rules for joining should be pretty fresh... copyrighted logos are not supposed to be shared on this forum ever.
Dave Hanks
- Capstone
- 4 Star Member
- Posts: 1015
- Joined: Fri Sep 13, 2013 8:42 am
- Location: Washington D.C. Metro
- Contact:
Re: Harley Davidson firepit
Fair Enough.DXF wrote:I was informed by the Administrator some time back that you can post pics but not dxf files. Almost everything shared on this forum has been copied. I have seen tons of copyrighted dxf files shared on this forum......Batman, Superman, Chevy logos, Ford logos etc. I will not share Harley logo dxf files.Capstone wrote:Sharing a Harlee D logo on this forum should never happen. Frankly, I'm surprised this entire thread hasn't been deleted by the Admin.Voesenekcnc wrote:would you share this dxf?
This is your very first post, which means the rules for joining should be pretty fresh... copyrighted logos are not supposed to be shared on this forum ever.
Dave Hanks
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
-
- 1/2 Star Member
- Posts: 1
- Joined: Sat Aug 19, 2017 8:58 pm
Re: Harley Davidson firepit
That looks awesome. I realize this is an old post but I'd love to see what it looks like after some heavy use.
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Jul 31, 2017 8:09 pm
Re: Harley Davidson firepit
Alright quick question.... how much would you charge for something like this? Welded not bolted though
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
This is a prototype. I won't be able to answer that question until Harley Davidson approves it. Wish I could sell them as hundreds of Harleys cruise thru here on the weekends to ride: http://www.421thesnake.com/Biscuit1979 wrote:Alright quick question.... how much would you charge for something like this? Welded not bolted though
Dave
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Jul 31, 2017 8:09 pm
Re: Harley Davidson firepit
In general, a firepit this size that is personalized for someone, no Harley emblem just a design... price?
-
- 4.5 Star Elite Contributing Member
- Posts: 1650
- Joined: Tue Feb 22, 2011 5:15 pm
- Location: Mountain City, Tennessee
Re: Harley Davidson firepit
With a simple design cut out probably $250-$400+ depending on the design. It would be cut out of .187"-.250" and welded. I very rarely do custom jobs so I'm not real sure on the price.....just guessing. I'm using this one to stack bags of trash in at the moment.Biscuit1979 wrote:In general, a firepit this size that is personalized for someone, no Harley emblem just a design... price?
Dave
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Jul 31, 2017 8:09 pm
Re: Harley Davidson firepit
Thanks. I work in a plate mill and can buy plate for 10 cents a pound. So it should be easy to make some money off these. Thanks again