Someone told me that I have too many welcome signs, so I thought I'd mix it up a bit.
I haven't cut one yet, and there are some thin areas that need work, but here ya go.
I just added a picture of my finished product, but scroll down to check out Acourtjester's version.
go away.jpg
GO AWAY, VARMINT revised.dxf
You currently do not have access to download this file. To gain download access for DXF, SVG & other files Click Here
Last edited by John Frantum on Mon Aug 22, 2016 8:50 pm, edited 7 times in total.
That would be neat to do an outline and then cut the inside parts and attach them to the outline.
May be another thing on my To Do list
Thanks for posting
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
What software are you using I can open it in SheetCam but not in Inkscape or Irfanview
I would like to break it up and make the inside parts separate cuts nested together so I can make a 3D type plaque.
Could you post it in a SVG file
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
I just use a cheap QCAD program at home, I usually use AutoCad/Striker to process them.
I just tried to export in SVG, but the line width goes crazy.
I'll try again later, have guests coming over tonight.
I took John's sign idea and rearranged it somewhat and this is what I can up with.
I used "Loctite super glue" and some pieces stuck to fast placement could have been better and I should have made it bigger. I lost 3 small parts and had to cut the again today need to paint and install them soon
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT