vikings or american flag?
-
- 2.5 Star Member
- Posts: 114
- Joined: Mon Apr 23, 2012 10:44 pm
- Location: Masonville IA
- Contact:
Re: vikings or american flag?
can someone dumb down the flag to autocad or corel draw?
thanks
thanks
- tnbndr
- 4.5 Star Elite Contributing Member
- Posts: 1677
- Joined: Mon Jan 09, 2012 4:30 pm
- Location: New Berlin, WI
- Contact:
Re: vikings or american flag?
The original file opened in Autocad 2010 just fine. Here it is saved as R12can someone dumb down the flag to autocad or corel draw?
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
-
- 2 Star Member
- Posts: 53
- Joined: Wed Apr 08, 2015 4:21 pm
Re: vikings or american flag?
Here's one of mine I made recently. I put a different spin on it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 53
- Joined: Wed Apr 08, 2015 4:21 pm
Re: vikings or american flag?
Used a slip roller to get the "wavy effect."
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2 Star Member
- Posts: 53
- Joined: Wed Apr 08, 2015 4:21 pm
Re: vikings or american flag?
One last pic with a clear coat and some more rolling.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: vikings or american flag?
great looking and very nice detail
Thanks for posting
Love the addition
Thanks for posting
Love the addition
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: vikings or american flag?
Please: Never say one last pic againScotchandIron wrote:One last pic with a clear coat and some more rolling.
Love your stuff and thanks again for sharing such a great file and your updates.
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
-
- 2.5 Star Member
- Posts: 114
- Joined: Mon Apr 23, 2012 10:44 pm
- Location: Masonville IA
- Contact:
Re: vikings or american flag?
it worked thank you !!!!! tnbndr!!!!
-
- 1/2 Star Member
- Posts: 9
- Joined: Mon Mar 22, 2010 10:12 am
Re: vikings or american flag?
scotchandiron .. did u post a file with the pledge included ??? am I jus missin it .. VERY NICE BTW .. thanx
-
- 1 Star Member
- Posts: 14
- Joined: Sat Mar 16, 2013 1:33 pm
Re: vikings or american flag?
scotchandiron thank you for the awesome file!
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: vikings or american flag?
I tried to cut the Tattered Flag and it came out like the drawing but not like the pictures. Two areas in the star field did not drop out and one or two places in the right side stayed connected to the base sheet.
I cut it from 18 Ga and its size was about 24" long and 10 high I did not read in the post about 24" was a minimum side. I will cut it again about 32" long in 14 Ga but I would like a better DFX file please maybe with the pledge on it too.
I cut it from 18 Ga and its size was about 24" long and 10 high I did not read in the post about 24" was a minimum side. I will cut it again about 32" long in 14 Ga but I would like a better DFX file please maybe with the pledge on it too.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Jan 22, 2014 6:44 pm
Re: vikings or american flag?
Not the full pledge but the flag is fixed. SVG file if you need it in DXF just post back up and I can convert it.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Jan 22, 2014 6:44 pm
Re: vikings or american flag?
Little bit different this time and here is a dxf. Alter as you like.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1 Star Member
- Posts: 12
- Joined: Fri Dec 14, 2012 7:08 pm
Re: vikings or american flag?
Thanks for the file, here is my finished product.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 119
- Joined: Sun Feb 14, 2016 10:08 am
Re: vikings or american flag?
That's awesome
Hypertherm Powermax 85
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
Candcnc Electronics
Mach3
SheetcamTNG
Aspire
-
- 1/2 Star Member
- Posts: 7
- Joined: Mon Mar 14, 2016 11:40 am
Re: vikings or american flag?
Does anyone actually have the dxf filedor that flag. All i saw the the dxf drawing. Does anyone actuall yhavete cut data. Thanks
Jeff
Jeff
-
- 1 Star Member
- Posts: 12
- Joined: Wed Oct 07, 2015 7:59 pm
- Location: East Windsor, NJ
- Contact:
Re: vikings or american flag?
I can't see a .dxf download for the flag, is there any way someone could email it to me? jvhchassisworks@gmail.com
EDIT: Nevermind, saw the post with the pledge
EDIT: Nevermind, saw the post with the pledge
Plasma Cam DHC2 4x4 Plasma Table
Hypertherm Powermax 65
Hypertherm Powermax 65
- hoppy81
- 1/2 Star Member
- Posts: 3
- Joined: Sat Nov 01, 2014 9:18 pm
- Location: Sandy, Utah
Re: vikings or american flag?
Thanks for sharing guys!! looks great!
PlasmaCam 4X4 DHC2
Hypertherm PowerMax 45
Hypertherm PowerMax 45
-
- 2 Star Member
- Posts: 85
- Joined: Tue Mar 27, 2012 7:23 pm
Re: vikings or american flag?
Thanks for sharing the great files !
-
- 1/2 Star Member
- Posts: 3
- Joined: Thu Jun 02, 2016 9:23 am
Re: vikings or american flag?
cool flag i cant find the link to the dxf
-
- 4 Star Member
- Posts: 950
- Joined: Thu Jan 02, 2014 6:33 pm
Re: vikings or american flag?
how did you curve it like that?
how are you guys hanging these? Especially the curved ones
how are you guys hanging these? Especially the curved ones
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
- steel 35
- 3.5 Star Member
- Posts: 634
- Joined: Sun Jan 11, 2015 11:12 am
- Location: N of Cali.
Re: vikings or american flag?
gamble wrote:how did you curve it like that?
how are you guys hanging these? Especially the curved ones
He said Slip roll
English wheel worked also
PPL HDG 4X8
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
Hyp 65 duramax's
C&CNC 620-5 Ethernet
Inkscape, Solid Edge, Sheetcam, Autocad 2K
Corel X7 Student NO DXF!
EasyScriber
-
- 1/2 Star Member
- Posts: 1
- Joined: Sun May 08, 2016 8:59 pm
Re: vikings or american flag?
Hey, Thanks for the picture. This is my first time using this site. I can not find where to download the tattered flag DXF File. I can see the picture of it, but that's it. Is there something that I'm doing wrong?
Thanks,
Caleb
Thanks,
Caleb
- acourtjester
- 6 Star Elite Contributing Member
- Posts: 7869
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
Re: vikings or american flag?
Are you a member???
do you see a message about no being able to download?????
do you see a message about no being able to download?????
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
-
- 1/2 Star Member
- Posts: 3
- Joined: Thu Jun 02, 2016 9:23 am
Re: vikings or american flag?
where is the file?