Christmas Tree Ornaments

[Weldtutor]

There are 4 variations in this first file.

Polishing surface, then finishing with clear or translucent coloured lacquer gives a nice effect.

TreeOrnaments.dxf

[Weldtutor]

This Angel ornament is 4" high.
After cutting it can be given a 3 dimensional effect by curving the skirt, body, & wings slightly backward.
The halo & arms are then bent forward.

AngelOrnam.dxf

[WSS]

I like the angel! Very clever. Thanks.

WSS

[FreeDXF.com]

Here are last few of those DXF files!

Ornament 10.dxf

Ornament 11.dxf

Ornament 12.dxf

Ornament 13.dxf

Ornament 14.dxf

Ornament 15.dxf

[oldsoulmetal]

Thank you to all that contributed to the files posted here.

[bwjls]

Jason you are really kind man Thanks for the files and Have yourself a Very Merry Christmas

[bigj121]

Thank you Jason for the Christmas gift!

[Weldtutor]

Another Angel that can be formed similar the the one in post #2 above, for a "3D" effect.

This Cherub as well as my other ornaments are normally cut from 20 gauge mild steel.

Thanks for the ornaments, "JH."

Cherub.dxf

AngelOrnWT2.dxf

[AIRFLOWKID]

Jason,
Thank you so much for the files. Your middle name is "Generous" I am sure.

Merry Christmas my friend,
Tim Red Robin Creatives

[BrianMick]

tis the season thank you jason
Brian
Merry Christmas all..........

[Weldtutor]

Two more for the festive season!
Both are about 4" tall.

CandyCane.dxf

CandleOrnam.dxf

[eggauto]

Thank you Jason for all the files. You sure do excel in the file sharing and as always your files are excellent.

[Weldtutor]

Thanks for your comments WSS & oldsoulmetal!

Here are a pair of snowflakes to add to the ornament collection.

Flake09A.dxf

Flake09.dxf

[djs]

thanks for sharing your Christmas files, God bless and and a Happy Holiday to everyone...............djs

[Weldtutor]

This bow & bell might "spruce" up your tree!

Thanks djs!

BowOrnam.dxf

BellWT2.dxf

[FreeDXF.com]

Thanks very much for the very kind comments. I hope everyone has a Very Merry Christmas. Enjoy your time with family and friends!

[Weldtutor]

The last 3 of my small tree ornaments for now.

Star can be scaled to use as a tree topper or left small.

In the "Project Picture Gallery" I have uploaded photos of some ornaments & the metal tree used to display them.

Feel free to add your ornaments in this thread, if you wish to share them.

Merry Christmas WT
.
.

OrnamentBauble.dxf

Star5Pt5.3Rnd.dxf

Starburst1WT.dxf

[Feckless]

Some nice seasonal stuff there, Jason, What size is recomended for the twist decorations, I have some 1mm stainless they might suit.
Thanks for sharing

[rkeytek]

I cut a few of Jason's designs the other night...cut from 20 ga galv. is what I had. They cut nice and opened up nicely!
Cut 3 ornaments and lashed them together to make a hanging decoration.

Thanks again for all the files they are great!

[metalart]

It's beginning to look a lot like Christmas! Everywhere you go!!...... (if you can't dance, sing!!!)

Thanks for all the great sharing!

[covingtoncg]

Christmas is around the corner. Thanks so much for sharing your work

[justfishmetalart]

Nice files, thanks!

[covingtoncg]

Loved the angel. Thanks so much..

[vic.pryor]

Thanks for the share ! Very timely

[Hilsmat1]

Hey everyone! Thanks for the files, these are great!