Christmas Tree Ornaments
- Weldtutor
- 2 Star Member
- Posts: 92
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Christmas Tree Ornaments
There are 4 variations in this first file.
Polishing surface, then finishing with clear or translucent coloured lacquer gives a nice effect.
Polishing surface, then finishing with clear or translucent coloured lacquer gives a nice effect.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Weldtutor
- 2 Star Member
- Posts: 92
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Re: Christmas Tree Ornaments
This Angel ornament is 4" high.
After cutting it can be given a 3 dimensional effect by curving the skirt, body, & wings slightly backward.
The halo & arms are then bent forward.
After cutting it can be given a 3 dimensional effect by curving the skirt, body, & wings slightly backward.
The halo & arms are then bent forward.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 3 Star Member
- Posts: 427
- Joined: Wed Sep 29, 2010 12:19 am
Re: Christmas Tree Ornaments
I like the angel! Very clever. Thanks.
WSS
WSS
- FreeDXF.com
- 2.5 Star Member
- Posts: 145
- Joined: Mon Mar 23, 2009 11:49 am
Re: Christmas Tree Ornaments
Here are last few of those DXF files!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 108
- Joined: Wed Sep 22, 2010 12:07 am
Re: Christmas Tree Ornaments
Thank you to all that contributed to the files posted here.
-
- 1.5 Star Member
- Posts: 48
- Joined: Thu Mar 04, 2010 2:23 am
- Location: Sulphur, OK
- Contact:
Re: Christmas Tree Ornaments
Jason you are really kind man Thanks for the files and Have yourself a Very Merry Christmas
-
- 2.5 Star Member
- Posts: 129
- Joined: Sat Feb 06, 2010 8:12 am
Re: Christmas Tree Ornaments
Thank you Jason for the Christmas gift!
- Weldtutor
- 2 Star Member
- Posts: 92
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Re: Christmas Tree Ornaments
Another Angel that can be formed similar the the one in post #2 above, for a "3D" effect.
This Cherub as well as my other ornaments are normally cut from 20 gauge mild steel.
Thanks for the ornaments, "JH."
This Cherub as well as my other ornaments are normally cut from 20 gauge mild steel.
Thanks for the ornaments, "JH."
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Member
- Posts: 229
- Joined: Sun Sep 27, 2009 9:48 pm
Re: Christmas Tree Ornaments
Jason,
Thank you so much for the files. Your middle name is "Generous" I am sure.
Merry Christmas my friend,
Tim Red Robin Creatives
Thank you so much for the files. Your middle name is "Generous" I am sure.
Merry Christmas my friend,
Tim Red Robin Creatives
- BrianMick
- 4 Star Elite Contributing Member
- Posts: 1003
- Joined: Sun Dec 06, 2009 8:00 am
- Location: St. Cloud,Minnesota United States of America
- Contact:
Re: Christmas Tree Ornaments
tis the season thank you jason
Brian
Merry Christmas all..........
Brian
Merry Christmas all..........
BrianMick
www.midwayiron.com
www.midwayiron.com
- Weldtutor
- 2 Star Member
- Posts: 92
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Re: Christmas Tree Ornaments
Two more for the festive season!
Both are about 4" tall.
Both are about 4" tall.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 2.5 Star Elite Contributing Member
- Posts: 178
- Joined: Sun Jul 18, 2010 7:59 pm
Re: Christmas Tree Ornaments
Thank you Jason for all the files. You sure do excel in the file sharing and as always your files are excellent.
- Weldtutor
- 2 Star Member
- Posts: 92
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Re: Christmas Tree Ornaments
Thanks for your comments WSS & oldsoulmetal!
Here are a pair of snowflakes to add to the ornament collection.
Here are a pair of snowflakes to add to the ornament collection.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 47
- Joined: Fri May 22, 2009 11:44 am
Re: Christmas Tree Ornaments
thanks for sharing your Christmas files, God bless and and a Happy Holiday to everyone...............djs
- Weldtutor
- 2 Star Member
- Posts: 92
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Re: Christmas Tree Ornaments
This bow & bell might "spruce" up your tree!
Thanks djs!
Thanks djs!
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- FreeDXF.com
- 2.5 Star Member
- Posts: 145
- Joined: Mon Mar 23, 2009 11:49 am
Re: Christmas Tree Ornaments
Thanks very much for the very kind comments. I hope everyone has a Very Merry Christmas. Enjoy your time with family and friends!
- Weldtutor
- 2 Star Member
- Posts: 92
- Joined: Wed Mar 10, 2010 11:54 am
- Location: Ontario Canada
Re: Christmas Tree Ornaments
The last 3 of my small tree ornaments for now.
Star can be scaled to use as a tree topper or left small.
In the "Project Picture Gallery" I have uploaded photos of some ornaments & the metal tree used to display them.
Feel free to add your ornaments in this thread, if you wish to share them.
Merry Christmas WT
.
.
Star can be scaled to use as a tree topper or left small.
In the "Project Picture Gallery" I have uploaded photos of some ornaments & the metal tree used to display them.
Feel free to add your ornaments in this thread, if you wish to share them.
Merry Christmas WT
.
.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
- Feckless
- 1.5 Star Member
- Posts: 26
- Joined: Sun Jun 27, 2010 4:09 am
- Location: Ireland
- Contact:
Re: Christmas Tree Ornaments
Some nice seasonal stuff there, Jason, What size is recomended for the twist decorations, I have some 1mm stainless they might suit.
Thanks for sharing
Thanks for sharing
-
- 2 Star Member
- Posts: 70
- Joined: Fri Jun 17, 2011 8:41 pm
Re: Christmas Tree Ornaments
I cut a few of Jason's designs the other night...cut from 20 ga galv. is what I had. They cut nice and opened up nicely!
Cut 3 ornaments and lashed them together to make a hanging decoration.
Thanks again for all the files they are great!
Cut 3 ornaments and lashed them together to make a hanging decoration.
Thanks again for all the files they are great!
-
- 4 Star Member
- Posts: 900
- Joined: Thu Sep 03, 2009 10:43 am
Re: Christmas Tree Ornaments
It's beginning to look a lot like Christmas! Everywhere you go!!...... (if you can't dance, sing!!!)
Thanks for all the great sharing!
Thanks for all the great sharing!
-
- 2.5 Star Member
- Posts: 105
- Joined: Tue Jul 11, 2017 10:34 pm
Re: Christmas Tree Ornaments
Christmas is around the corner. Thanks so much for sharing your work
-
- 2.5 Star Member
- Posts: 176
- Joined: Sun Nov 26, 2017 8:03 pm
Re: Christmas Tree Ornaments
Nice files, thanks!
-
- 2.5 Star Member
- Posts: 105
- Joined: Tue Jul 11, 2017 10:34 pm
Re: Christmas Tree Ornaments
Loved the angel. Thanks so much..
-
- 1 Star Member
- Posts: 11
- Joined: Fri Aug 07, 2015 10:48 pm
Re: Christmas Tree Ornaments
Thanks for the share ! Very timely
-
- 1 Star Member
- Posts: 16
- Joined: Sun Oct 25, 2020 3:01 am
Re: Christmas Tree Ornaments
Hey everyone! Thanks for the files, these are great!