Look for alternator mount
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Feb 29, 2012 1:19 pm
- Location: Shawnee oklahoma (bethel acres)
- Contact:
Look for alternator mount
Looking for some Sbc alternator mounts
-
- 4 Star Member
- Posts: 1008
- Joined: Mon May 21, 2012 3:58 pm
- Location: spanaway wa.
-
- 3 Star Member
- Posts: 311
- Joined: Fri Oct 31, 2014 8:50 am
- Location: East Tennessee
Re: Look for alternator mount
Have you tried Auto Zone? Just kidding, did you have something in mind like for a custom bracket or just a standard off the shelf one
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: Look for alternator mount
Jim, Small Block Chevy.... The old were terrible for breaking.
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 3 Star Elite Contributing Member
- Posts: 445
- Joined: Sat Jul 04, 2015 10:43 pm
Re: Look for alternator mount
Oh and here:
https://grabcad.com/library/tag/chevy
https://grabcad.com/library/tag/chevy
Steve
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
Platform CNC Plasma table
CandCNC Ethercut IV DTHC
Hypertherm 85/CPC/RS485
Miller 350P
Miller Dynasty 280DX
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Feb 29, 2012 1:19 pm
- Location: Shawnee oklahoma (bethel acres)
- Contact:
Re: Look for alternator mount
Was looking for something custom came up with this last night thank it's going to work
![Image](https://www.plasmaspider.com/images/AltMount.jpeg)
![Image](https://www.plasmaspider.com/images/AltMount.jpeg)
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Look for alternator mount
and he didn't post the file ![Sad :(](./images/smilies/icon_e_sad.gif)
![Sad :(](./images/smilies/icon_e_sad.gif)
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley
how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
-
- 1.5 Star Member
- Posts: 29
- Joined: Wed Feb 29, 2012 1:19 pm
- Location: Shawnee oklahoma (bethel acres)
- Contact:
Re: Look for alternator mount
Will post file tomorrow
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: Look for alternator mount
I did this one for my brother in law's drag car, stemming from my first real use of "Scanything" I scanned his original POS which was broken and I had re-welded it several times, just too thin for his setup,
![Image](https://www.plasmaspider.com/images/CramerRacing.jpg)
so I did this one as an upgrade to that one. after seeing his installation I made the adjuster bracket too...
![Image](https://www.plasmaspider.com/images/alternator-mount.jpg)
![Image](https://www.plasmaspider.com/images/CramerRacing.jpg)
so I did this one as an upgrade to that one. after seeing his installation I made the adjuster bracket too...
![Image](https://www.plasmaspider.com/images/alternator-mount.jpg)
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Look for alternator mount
nice work kkroger, i like parts that are practical
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley
how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
-
- 2.5 Star Member
- Posts: 229
- Joined: Sat Apr 26, 2014 7:56 pm
Re: Look for alternator mount
Then you will like this one too _Ogre
He brought me this....
![Image](https://www.plasmaspider.com/images/Puller.jpg)
So I made him this
![Image](https://www.plasmaspider.com/images/Puller3.jpg)
![Image](https://www.plasmaspider.com/images/Puller3.jpg)
He brought me this....
![Image](https://www.plasmaspider.com/images/Puller.jpg)
So I made him this
![Image](https://www.plasmaspider.com/images/Puller3.jpg)
![Image](https://www.plasmaspider.com/images/Puller3.jpg)
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Look for alternator mount
I have one like this, SBC mid mount long pump
![Image](https://www.plasmaspider.com/images/MidMount.JPG)
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Look for alternator mount
I should say it should be cut out of .25", the smaller bracket goes in front of the waterpump mounting holes, and you may have to polish the housing down a bit for a perfect fit. I did anyhow.
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
- _Ogre
- 3.5 Star Member
- Posts: 529
- Joined: Sun Sep 15, 2013 4:26 pm
- Location: Motown
Re: Look for alternator mount
nice work poh
thanks for the file
i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill
![Image](https://www.plasmaspider.com/images/SBCPlasma.jpg)
![Image](https://www.plasmaspider.com/images/SBCPlasma3.jpg)
thanks for the file
i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Image](https://www.plasmaspider.com/images/SBCPlasma.jpg)
![Image](https://www.plasmaspider.com/images/SBCPlasma3.jpg)
bulltear 4x8 cnc plasma table, candcnc bladerunner w/dthc, hypertherm powermax 65, sheetcam, mach3
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley
how cool!
laser cross hair for hypertherm torch http://www.plasmaspider.com/viewtopic.php?f=6&t=12508
an ogre smiley
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
- Poh
- 2.5 Star Elite Contributing Member
- Posts: 111
- Joined: Thu Jun 20, 2013 5:21 pm
- Location: Plumas County, Ca.
Re: Look for alternator mount
Thanks Ogre, My latest build is how I learned my software and table... If only I had it for the previous vehicles_Ogre wrote:nice work poh
thanks for the file
i wish we had the plasma table when i built my 58 truk
i would have done everything on the table
instead of cutting them out with the grinder and drill![]()
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Poh, Stainless is Forever!!!
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
Torchmate 5'x10' water table,Torchmate 8 CAD
Hypertherm HSD 130
Plate Marker ,Tube Cutter, and Oxy-Acetylene
Miller Dynasty 350
Miller 350 p
-
- 1 Star Member
- Posts: 10
- Joined: Thu May 31, 2018 9:13 pm
-
- 6 Star Elite Contributing Member
- Posts: 8933
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: Look for alternator mount
Perhaps these drawings will help.
David
David
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
- 1.5 Star Member
- Posts: 35
- Joined: Mon Aug 19, 2019 11:48 pm
Re: Look for alternator mount
What's up with the valve covers?Monty prince wrote: ↑Fri Feb 05, 2016 12:39 pm Was looking for something custom came up with this last night thank it's going to work
![]()
-
- 3 Star Elite Contributing Member
- Posts: 469
- Joined: Sun Oct 31, 2010 1:26 pm
- Location: Kannapolis,NC
- Contact:
Re: Look for alternator mount
Never did post that dxf....
CandCNC
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl
-
- 3 Star Elite Contributing Member
- Posts: 469
- Joined: Sun Oct 31, 2010 1:26 pm
- Location: Kannapolis,NC
- Contact:
Re: Look for alternator mount
Got a layout on that power steering bracket?
CandCNC
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl
Mach3
Sheetcam
Draftsight
Hypertherm 65 machine torch
Millermatic 210
Passport plus
Spoolmate 150
Miller Bobcat 225
http://benzweldingandfabrication.com/
https://www.facebook.com/pages/Benz-Wel ... 468?ref=hl