It is currently Fri Oct 19, 2018 2:41 pm


Dynatorch Color

Dynatorch hardware discussion forum
Posts: 71
Joined: Sat Mar 13, 2010 2:18 pm

Dynatorch Color

Postby cutterguy » Fri Feb 24, 2012 7:26 pm

Does anyone have the Dupont paint code for Dynatorch red. I have the code from Dynatorch but it's a Sherwin Williums powder coat code and it dosn't cross over to any paint that I know of. Any help would be great


Posts: 437
Joined: Wed Sep 29, 2010 12:19 am

Re: Dynatorch Color

Postby WSS » Fri Feb 24, 2012 9:55 pm

Just about any safety red will do. I have had powder done in gloss safety red and it is real close. I used rustoleum safety red to coat a new shroud I made a couple of months ago, it is even closer.


Posts: 29
Joined: Sat Jan 07, 2012 1:04 pm

Re: Dynatorch Color

Postby esracerx46 » Fri Mar 02, 2012 8:20 am

I'd talk to your local powder coater. They have paint that will match the powdercoat

Pro Arc Weldshop
Posts: 17
Joined: Wed Feb 02, 2011 6:04 pm

Re: Dynatorch Color

Postby Pro Arc Weldshop » Sat Mar 03, 2012 7:38 am

I built my table and closed the bottom in, had it all powder coated with "Ferrari red" it was almost a perfect match.
I have attached a photo didn't come out real good was from my phone.

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

User avatar
Posts: 19
Joined: Mon Dec 13, 2010 2:06 pm
Location: Indiana

Re: Dynatorch Color

Postby jbartley » Sat Mar 03, 2012 10:50 pm

The color looks great! Really like your table configuration.
Thank you caveman for wheel and fire.

Pro Arc Weldshop
Posts: 17
Joined: Wed Feb 02, 2011 6:04 pm

Re: Dynatorch Color

Postby Pro Arc Weldshop » Sun Mar 04, 2012 8:59 am

Thank you, I built it last April. It will cut a 5'3" x 5' 6" sheet. Have been very happy with the Dyanatorch

Posts: 4
Joined: Tue Dec 06, 2011 7:32 pm

Re: Dynatorch Color

Postby Titanfab » Sat Jul 14, 2012 9:36 pm

red baron we used

Return to “Dynatorch”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's