Grease Fittings

Don't see your table manufacturer listed above? Post here in this forum.
Post Reply
SlackerMan9
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Sun Jan 28, 2018 11:36 am

Grease Fittings

Post by SlackerMan9 »

Hey Dynatorch Owners - what kind of grease gun do you use to grease the linear slides. I have a new table and my standard grease gun fitting is too fat/big to fit onto the zerk. Is there a micro gun or something?

Thanks
bjinxed16
1/2 Star Member
1/2 Star Member
Posts: 1
Joined: Thu Oct 19, 2017 12:16 pm

Re: Grease Fittings

Post by bjinxed16 »

Contact Dynatorch. They can give you the size and they even have the grease gun adaptor that they sell.
War Hammer
1 Star Member
1 Star Member
Posts: 18
Joined: Sun Sep 24, 2017 8:52 pm

Re: Grease Fittings

Post by War Hammer »

When you do get the gun set up make sure you run Mystik JT-6
We used to just run a generic grease on the table. With a recommendation from Dynatorch we switched to the JT-6. the table glides much smoother. we won't go back.
Jearnest13
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Mon Aug 20, 2018 4:31 pm

Re: Grease Fittings

Post by Jearnest13 »

Did you ever find out the answer to this? I'm having the exact same problem.
User avatar
cstroke
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 409
Joined: Thu May 24, 2012 7:45 pm

Re: Grease Fittings

Post by cstroke »

SUBSCRIBING...
6’x12’ Dynatorch powermax 85
12’ Wysong brake
5’x 5/16’ wysong rolls
3.8’x10’ shear
65 Ton ironworker
Boss laser 3655 150 watt CO2.
SFX 100watt Mopa
Quicncy 7.5hp
Square wave tig, Multimatics, Miller bobcat efi.
Post Reply

Return to “Various Manufacturers Forum”