Easyscriber engrave attachment for Hypertherm torch's

Corner squiggles on my dynatorch xls

Dynatorch hardware discussion forum
Post Reply
Posts: 19
Joined: Thu Jan 07, 2016 5:23 pm

Corner squiggles on my dynatorch xls

Post by Dynatorch78 » Wed Feb 03, 2016 7:54 pm

Whenever my machine takes a corner at 120IPM or above, I get a squiggly line for about 2 " then it becomes straight again. I turned the corner intensity all the way down and slowed the speed down as much as possible also. I don't want to be smoothing out these squiggles forever. Does anyone have any Advice? BY the way, it is a new Dynatorch xls .

User avatar
Elite Contributing Member
Elite Contributing Member
Posts: 1637
Joined: Wed Aug 29, 2012 5:17 pm

Re: Corner squiggles on my dynatorch xls

Post by Gamelord » Wed Feb 03, 2016 9:31 pm

This is a common issue, something is loose, either your gantry has some play, your torch has some play or your slats are shaking in the table.
Once you take flight, your eyes will forever be turned to the sky." "Lack of appreciation is the worlds biggest crime."

Torchmate 6x14 w/THC Downdraft
Thermal Dynamics Cutmaster 101
Corel Draw / Adobe Illustrator
Torchmate CAD

Posts: 52
Joined: Fri Apr 11, 2014 11:54 am

Re: Corner squiggles on my dynatorch xls

Post by TMC » Wed Feb 10, 2016 3:08 pm

Dynatorch78, I have been down this road myself with my Dynatorch. Don't assume anything is wrong with your gantry. I would suggest calling Michael Garrett, he helped me out a bunch. I have a SuperB so I can't help with your table much. Good luck!
Talbot Metal Crafting
DynaTorch 4x4 SuperB
Hypertherm PMX 85
Corel 7X
Solid Edge

Easton, Maryland

Post Reply

Return to “Dynatorch”