need this horse converted

If you are looking for help with a file conversion please post it here rather than in the file sharing forums.
Post Reply
Just Bill
1/2 Star Member
1/2 Star Member
Posts: 9
Joined: Mon Nov 10, 2008 11:58 pm

need this horse converted

Post by Just Bill »

I have someone needing this made to match his current gate. Can anybody help me out.
Thank You
Bill Longiotti

Image
adbuch
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 8598
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: need this horse converted

Post by adbuch »

Bill - I think this one would benefit from a manual trace. I have sent you a PM.
David
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3044
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: need this horse converted

Post by Joe Jones »

I dragged it into Paint 3D and then inkscape, to produce a .jpg. Then I imported it into DesignEdge and cleaned it up a bit. You might want to do more to it, but here is the file after 30 minutes of playing around ...

It occurs to me now that the bottom fillet of the lower bar is probably cropped from the original photo. I am sure you can make that adjustment!

Joe
Image

HORSE IN CIRCLE-JJ.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
Just Bill
1/2 Star Member
1/2 Star Member
Posts: 9
Joined: Mon Nov 10, 2008 11:58 pm

Re: need this horse converted

Post by Just Bill »

It looks super good. No it looks GREAT.
Thanks
Bill Longiotti
User avatar
Joe Jones
5 Star Elite Contributing Member
5 Star Elite Contributing Member
Posts: 3044
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: need this horse converted

Post by Joe Jones »

I like to keep my skills sharp so I tackle stuff like this for the fun of it. :roll: :mrgreen:

It isn’t a perfect match so if you need it to match exactly you’ll have to do a little bit of work to it.

Joe



.
Franklin, KY., USA
Samson 510 & 4x4
6” Z Rail Lift Kit for PlasmaCam
CreatBot D600 PRO 3D Printer
12 Lasers
FREE DesignEdge Training!

It is more fun when it isn't necessary!
Post Reply

Return to “File Conversion Help Wanted”