File help on an ongoing basis
-
1Gvisage
- 1/2 Star Member
- Posts: 1
- Joined: Sat Nov 14, 2020 7:40 pm
File help on an ongoing basis
Looking for someone to help me with drawings! I just bought a plasma table for HVAC work but I want to do more art with it. Looking for someone to convert or draw for me on an as needed basis. Looking to pay a flat rate on drawings. Can pay by PayPal or Venmo. Thanks in advance.
-
djreiswig
- 4.5 Star Elite Contributing Member
- Posts: 1937
- Joined: Thu Nov 19, 2015 10:02 pm
- Location: SE Nebraska
Re: File help on an ongoing basis
There are a few people at the bottom of this post that do file conversations.
viewtopic.php?f=98&t=27175
viewtopic.php?f=98&t=27175
2014 Bulltear (StarLab) 4x8
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
C&CNC EtherCut
Mach3, SheetCam, Draftsight
Hypertherm PM65
Oxy/Acetylene Flame Torch
Pneumatic Plate Marker, Ohmic, 10 inch Rotary Chuck (in progress)
-
adbuch
- 6 Star Elite Contributing Member
- Posts: 8624
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
- Contact:
Re: File help on an ongoing basis
If you become a contributing member, you will have access to drawing/dxf files of all sorts at this site. There are also plenty here willing to help you if you get stuck on editing your files.
David
David
-
RobinHillMachine
- 3 Star Member
- Posts: 310
- Joined: Mon Sep 19, 2016 1:32 pm
- Location: Pennsylvania
- Contact:
Re: File help on an ongoing basis
You can email DXF@robinhillmachine.com with the image and cut sizes any time you need file help. I specialize in turning photos into cut ready files for plasma but make all kinds everyday.
