Could I get some help converting this to pcm or dxf please

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
Bdh66
1.5 Star Member
1.5 Star Member
Posts: 32
Joined: Wed Mar 14, 2018 3:46 pm

Could I get some help converting this to pcm or dxf please

Post by Bdh66 »

I have been trying and it just will not come out right for me. It does not have to keep the equipment in it. It needs to be 36"x 24" and I am going to use 1/8 " material. Thank you in advance
FullSizeR.jpg

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

harrymorley
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 993
Joined: Thu Nov 21, 2013 5:32 pm

Re: Could I get some help converting this to pcm or dxf please

Post by harrymorley »

here are the horns..carnivalee freak show is the font closest to whats shown. 20 mins work smoothing the font and it will work
deer horns.pcm

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”