Help with a trace

Share, browse, & download dxf, svg, or other vector based designs. If you take be sure to give back.
Post Reply
MGardner
2 Star Member
2 Star Member
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Help with a trace

Post by MGardner »

Can someone help me out by tracing these logos? I mainly only care about the one in the upper left corner. Since they were drawn with pencil when I try and trace it it traces all the brush strokes also.
Thanks
Michael
GV Logo.pdf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

User avatar
rdj357
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1157
Joined: Sun Mar 11, 2012 4:40 pm
Location: Tahlequah, OK
Contact:

Re: Help with a trace

Post by rdj357 »

Here you go, not cut ready at all but is a reasonable start!

Hope it helps.
GV.jpg
GV.dxf

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

MGardner
2 Star Member
2 Star Member
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Re: Help with a trace

Post by MGardner »

Robert
Thank you very much this is a great start. When I traced it it was a million tiny jumbled lines and none of them joined.
Thanks
Michael
Post Reply

Return to “DXF & SVG Plasma Cutting File Sharing Forum”