Easyscriber engrave attachment for Hypertherm torch's
 

Help with a trace

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
Post Reply
MGardner
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Help with a trace

Post by MGardner » Sun Sep 16, 2018 8:03 pm

Can someone help me out by tracing these logos? I mainly only care about the one in the upper left corner. Since they were drawn with pencil when I try and trace it it traces all the brush strokes also.
Thanks
Michael
GV Logo.pdf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 566
Joined: Sun Mar 11, 2012 4:40 pm

Re: Help with a trace

Post by rdj357 » Mon Sep 17, 2018 7:11 am

Here you go, not cut ready at all but is a reasonable start!

Hope it helps.
GV.jpg
GV.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

MGardner
Posts: 72
Joined: Wed Feb 05, 2014 5:17 pm
Location: Dallas Texas

Re: Help with a trace

Post by MGardner » Mon Sep 17, 2018 9:35 am

Robert
Thank you very much this is a great start. When I traced it it was a million tiny jumbled lines and none of them joined.
Thanks
Michael

Post Reply

Return to “DXF Art - DXF Clip Art File Sharing Forum”