Can someone do a trace of the following logo? I am wanting to make a bench to donate and this will be the back. I have tried in do a trace in inkscape and it comes out horrible so I would be grateful if someone could do a better trace.
I dont care about the dates or the chili cookoff on the bottom
Thanks
Michael
Bloomin Bluegrass Festival Logo
-
MGardner
- 2 Star Member
- Posts: 72
- Joined: Wed Feb 05, 2014 5:17 pm
- Location: Dallas Texas
Bloomin Bluegrass Festival Logo
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Help with trace
Here ya go. Not bridged so you'll have to handle that part for however you choose to put it into a bench.
You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here
Robert Johnson
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
-
MGardner
- 2 Star Member
- Posts: 72
- Joined: Wed Feb 05, 2014 5:17 pm
- Location: Dallas Texas
Re: Help with trace
Robert
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
-
rdj357
- 4 Star Elite Contributing Member
- Posts: 1184
- Joined: Sun Mar 11, 2012 4:40 pm
- Location: Tahlequah, OK
- Contact:
Re: Help with trace
You're very welcome! I traced it by hand. An auto trace was never going to get it with the quality of image you had to work with.MGardner wrote:Robert
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
THANK YOU!!!!!
This is PERFECT!!!!!!!
Im not sure what I was doing wrong but this is 1000 times better then when I was trying to trace it in inkscape
Thank you again
Michael
Robert Johnson
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
PlasmaCAM GURU & Instructor
FourNinety Creations & Learn PC, LLC
(918) 457-0289 * Robert@490Creations.com
Did I help and you want to help me out? Buy me a coffee! - Thanks!
I am not affiliated with PlasmaCAM, Inc. in any way. I offer training on their equipment and software. All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them are for nominative purposes only and does not imply any affiliation with or endorsement by them.
