Easyscriber engrave attachment for Hypertherm torch's
 

PCM TO DXF

DXF Art Sharing Forum is for sharing dxf, plt, or any other vector file for plasma cutting. Browse what others have posted or post some DXF art files of your own.
Post Reply
volquartsen
Posts: 86
Joined: Mon Jul 06, 2015 1:44 am
Location: north bend OR

PCM TO DXF

Post by volquartsen » Thu Feb 15, 2018 11:31 am

i only have the basic software for plasmacam---

just need it converted to dxf.. thank you

Image
EXHAUST FLANGE OCP.pcm

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 548
Joined: Sun Mar 11, 2012 4:40 pm

Re: PCM TO DXF

Post by rdj357 » Thu Feb 15, 2018 4:40 pm

Here you go - since your file had both regular paths and cut paths, I separated them from each other in the drawing since a DXF would just have them all the same type piled on top of each other.
EXHAUST FLANGE OCP DXF.dxf

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

volquartsen
Posts: 86
Joined: Mon Jul 06, 2015 1:44 am
Location: north bend OR

Re: PCM TO DXF

Post by volquartsen » Fri Feb 16, 2018 12:55 am

Thank you very much

Post Reply