Arclight Hardware discussion forum.
3 posts • Page 1 of 1
- 1/2 Star Member
- Posts: 1
- Joined: Wed May 04, 2022 2:57 pm
This has happened several times since I bought the table. Only the left side motor will move with pressing up/down keys. Only the right side motor will move when pressing the PG Up or PG down but the Z won't move. X motor is OK. I have made several calls to tech support but have not received a call back. I am running Mach 4 on an Archlight 4x8 table.
- 5.5 Star Elite Contributing Member
- Posts: 4369
- Joined: Thu Sep 21, 2017 5:22 pm
- Location: Tucson, Arizona
If the buttons/keys you are pressing are on a pendant or separate control pad, there is always the possibility that your keypad is malfunctioning. I am not familiar with the Archlight equipment, but with the Plasmacam which I own - the software has built-in diagnostics for testing keypad function of individual buttons/keys. You might take a look at your owner's manual to see if your table has something similar.
- 2.5 Star Member
- Posts: 229
- Joined: Tue Sep 30, 2008 3:40 pm
That is very odd but I am with David. Definitely try a different keyboard if you haven't already done so, preferably not a wireless one just to see. Its a long shot but I have seen the simplest things like that solve strange issues in the past. Good luck and curious what you find out.