Easyscriber engrave attachment for Hypertherm torch's

check moisture in air?

Share tips and tricks you know of in this forum. Plasma cutting, material handling, metal finishing, marketing, or anything that you feel is helpful.
Post Reply
Posts: 12
Joined: Mon Feb 20, 2017 9:26 am

check moisture in air?

Post by hbg » Tue Oct 10, 2017 2:51 pm

Any easy way to check if there is moisture in your air line? I have a OLD air dryer and want to be sure its still doing its job. No noticeable moisture coming out when blowing air, but air is not really cold coming out the air dryer either. Having a little cut issues and just wanting to start somewhere.

User avatar
Elite Contributing Member
Elite Contributing Member
Posts: 680
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: check moisture in air?

Post by WyoGreen » Thu Oct 12, 2017 8:15 pm

Somewhere in the last few weeks on here there was a post on this subject. Someone said something about blowing the air across a cold mirror. If you see any moisture on the mirror, then you have moisture in your air. (At least that's kinda how I remember it!) ;)
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
CNC Router table

Post Reply