Easyscriber engrave attachment for Hypertherm torch's
 

putting Plasma Cam grates together

Share tips and tricks you know of in this forum. Plasma cutting, material handling, metal finishing, marketing, or anything that you feel is helpful.
Post Reply
james.davis
Elite Contributing Member
Elite Contributing Member
Posts: 864
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

putting Plasma Cam grates together

Post by james.davis » Sun Aug 20, 2017 11:20 pm

I've had a real trying time putting the Plasma Cam grates together and installing them. I finally figured out if you zip tie all the outer connections together you can lift the old grates out and install new ones with out everything falling apart. Just a saying.
Jim

james.davis
Elite Contributing Member
Elite Contributing Member
Posts: 864
Joined: Mon May 21, 2012 3:58 pm
Location: spanaway wa.

Re: putting Plasma Cam grates together

Post by james.davis » Sun Aug 20, 2017 11:22 pm

james.davis wrote:I've had a real trying time putting the Plasma Cam grates together and installing them. I finally figured out if you zip tie all the outer connections together you can lift the old grates out and install new ones with out everything falling apart. Just saying.
Jim

Post Reply