Neat Video - Plasma Cutting Tubing Notcher

Share tips and tricks regarding cut cutting, material handling, metal finishing, marketing, or anything you find helpful.
Post Reply
User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 7770
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Neat Video - Plasma Cutting Tubing Notcher

Post by acourtjester »

Here is a neat Plasma cutter setup for production shops
https://www.youtube.com/watch?v=qnYNEfv5IaY
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT
User avatar
WyoGreen
4 Star Member
4 Star Member
Posts: 897
Joined: Tue Mar 04, 2014 8:36 pm
Location: Cheyenne, Wyoming

Re: Neat Video

Post by WyoGreen »

That was an interesting concept, moving the torch instead of the work. Just goes to show there's more than one way to accomplish a task.

Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
User avatar
Capstone
4 Star Member
4 Star Member
Posts: 1015
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro
Contact:

Re: Neat Video

Post by Capstone »

These guys from Make it Extreme have a pretty good track record of building interesting tools and other projects. I think the fact that this design requires no g-code or software to control things is the main reason for the way it was built.
Phil
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG
User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1669
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Neat Video

Post by tnbndr »

Pretty elaborate notcher!!1
Dennis
LDR 4x8, Scribe, DTHCIV
Hypertherm PM45, Macair Dryer
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215 MultiMatic
RW 390E Slip Roll (Powered)
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com
Post Reply

Return to “Tech Tips From Other Members”