add picture to saved dfx file
add picture to saved dfx file
Need to update my save files that I have downloaded, how can I go back and add picture to my files. when I open it up in design edge I have to open look at the drawing close it and than go to the next file is there a way I can edit my saved file to add the picture to it so I can see just by opening my save dxf file, Any help or suggestion on this I would be grateful thanks Robert.
( I know some where on here some one talked about this before I have searched but can not find the topic. )
( I know some where on here some one talked about this before I have searched but can not find the topic. )
Plasmacam 4x4
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
- acourtjester
- Elite Contributing Member
- Posts: 3441
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
- Contact:
Re: add picture to saved dfx file
There is a free program called Irfan-view that you can use to view DXF file images by clicking on them. You need a pluging for the program so it will do this.
this is what they look like in a folder and then opened.
this is what they look like in a folder and then opened.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig
Re: add picture to saved dfx file
Thanks I will check it out, just trying to find something faster when I am looking for a file so I thought a picture would work instead of written description. once again thanks Robert.
Plasmacam 4x4
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
Designedge software
Hypertherm Powermax 65
Hypertherm powermax 380
Thermodynamics cut master 85
Jet 4' box & pan break
Eastwood Powder coating guns.
- acourtjester
- Elite Contributing Member
- Posts: 3441
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
- Contact:
Re: add picture to saved dfx file
here is a post Capstone just posted may be the answer you are looking for.
http://www.plasmaspider.com/viewtopic.php?f=6&t=20109
http://www.plasmaspider.com/viewtopic.php?f=6&t=20109
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig
- WyoGreen
- Elite Contributing Member
- Posts: 713
- Joined: Tue Mar 04, 2014 8:36 pm
- Location: Cheyenne, Wyoming
- Contact:
Re: add picture to saved dfx file
A couple of things I have done to improve the viewing of thumbnails to find the file I am looking for are:
Right click on the folder you are looking thru and select View/Large icons. This will let you see your .bitmap type icons as a thumbnail .
Download a windows explorer plugin for viewing .svg icons, which will, along with the previous suggestion, let you view .svg and Corel Draw .cdr icons as thumbnails. https://svgextension.codeplex.com/
I have not found a .dxf explorer plugin yet, but am still looking.
Steve
Right click on the folder you are looking thru and select View/Large icons. This will let you see your .bitmap type icons as a thumbnail .
Download a windows explorer plugin for viewing .svg icons, which will, along with the previous suggestion, let you view .svg and Corel Draw .cdr icons as thumbnails. https://svgextension.codeplex.com/
I have not found a .dxf explorer plugin yet, but am still looking.
Steve
Precision Plasma gantry
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
CommandCNC Linux controller w/Feather Touch & PN200 hand controller
HT-45 plasma cutter
Plate Marker
Router
Laser
Re: add picture to saved dfx file
Use a free program called IBrowser to view any f
ile on your computer, it is awesome
ile on your computer, it is awesome
Re: add picture to saved dfx file
View any file , save a lot of time
with Ibrowser
with Ibrowser
- rons
- Elite Contributing Member
- Posts: 176
- Joined: Thu Jul 23, 2015 2:26 pm
- Location: Charlotte, NC
- Contact:
Re: add picture to saved dfx file
https://archive.org/download/tucows_214719_iBrowser
works great thanks
works great thanks
4x8 Home made with PPL Gantry
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
Bladder water table
Candcnc EtherCut + DTHCIV
Hypertherm PM 65 machine
Sheetcam, Mach 3
Corel DrawX7
TurboCad 2015
211 Miller Mig
Ingersoll Rand 7.5 hp 80 gal
Harbor Ref. Dryer
Lathe, BP, 1" x 12" Cosan Miter Saw,
- acourtjester
- Elite Contributing Member
- Posts: 3441
- Joined: Sat Jun 02, 2012 6:04 pm
- Location: Pensacola, Fla
- Contact:
Re: add picture to saved dfx file
Very nice thanks for the link, it takes a little sniffing but after you get acquainted it looks neat.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig
Re: add picture to saved dfx file
Works good on image files but, not on DXF files like Irfan View does
Who is online
Users browsing this forum: No registered users and 3 guests