wondering what to charge

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
Jason@bc
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 208
Joined: Mon May 07, 2018 5:27 pm
Location: Moose Jaw Sask.

wondering what to charge

Post by Jason@bc »

Hey all, just curious what to charge a customer on some 3/8'' plate, 4''x4'' square with a peck-pierce on each corner, they are drop-outs but I will eventually be cutting these out of full sheets, any info is much appreciated,thanks.
gamble
4 Star Member
4 Star Member
Posts: 950
Joined: Thu Jan 02, 2014 6:33 pm

Re: wondering what to charge

Post by gamble »

$5? just shooting at the hip
Torchmate 2x2 - Flashcut
Powermax 45 - Machine torch
Taig CNC Mill - Flashcut
Razorweld Distributor
grindergary
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 623
Joined: Sat Aug 25, 2012 8:08 pm
Location: Edmonton, Alberta Canada
Contact:

Re: wondering what to charge

Post by grindergary »

I come up with $5.76, but that is CAD dollars.
4x8 Home made with Precision Plasma LLC. Gantry
4x8 Home Router made with Precision Plasma LLC. Gantry
Candcnc DHCTII Electronics
Hypertherm Powermax 105 machine torch
Sheetcam, Mach 3
Corel Draw 8, V Carve Pro
Miller CTS 280 Miller Mig
Jason@bc
2.5 Star Elite Contributing Member
2.5 Star Elite Contributing Member
Posts: 208
Joined: Mon May 07, 2018 5:27 pm
Location: Moose Jaw Sask.

Re: wondering what to charge

Post by Jason@bc »

I was between $4 and $5 myself, so I'm not overcharging, thanks for the info guys, I like that expression btw, shootin' at the hip.
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”