It is currently Wed Oct 17, 2018 7:29 pm

 

60" Tall metal "Z" letter price check

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
User avatar
Nacs Fab
Elite Contributing Member
Elite Contributing Member
Posts: 285
Joined: Tue Dec 04, 2012 4:11 pm
Location: Columbia, MO

60" Tall metal "Z" letter price check

Postby Nacs Fab » Thu Sep 13, 2018 12:07 pm

I have a job request to cut a 60" tall by 58" wide letter "Z" from a customer supplied dxf file. They want it to have fully welded and finished seams with a 2" reveal to make it have a 3D look. I am invisioning a flat 14 gauge main body with 2" wide 20 gauge steel formed to fit the edges of the letter and fully welded (carefully and slowly) and then finish ground. They want 6" long 1/4" dowel "studs" and 3" long spacers (10 total of each). This will then be fully primered and painted with a custom color. The plan is for the owner to install LED Lighting inside the cavity of the letter in the back and it will space off the brickwork roughly 1". Attached is a DXF.

Z Letter.jpg

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Shop Droids Plasmabot 3.0 DIY 4x8 with water table
G540 with LCTHC by candcnc
Hypertherm 1250 with Duramax Torch Upgrade
all built... by me...

tinspark
Posts: 8
Joined: Wed May 30, 2018 4:28 pm

Re: 60" Tall metal "Z" letter price check

Postby tinspark » Thu Sep 20, 2018 1:25 am

$500.oo
8 hour at 50/per hr plus sheet ….Gut Guestimate..


Return to “Pricing, Advertising, & Marketing Your Products Forum”

Who is online

Users browsing this forum: No registered users and 3 guests

Easyscriber engrave attachment for Hypertherm torch's