Need help with quote please

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
Bscott0008
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Fri Aug 18, 2017 9:30 am

Need help with quote please

Post by Bscott0008 »

I have never quoted anyone for just cutting metal they need 200 of these parts they supply the metal

You currently do not have access to download this file.
To gain download access for DXF, SVG & other files Click Here

mdwalker
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 524
Joined: Fri Nov 14, 2008 10:20 am

Re: Need help with quote please

Post by mdwalker »

I would be at $3.40 each. This is based on my normal pricing if the customer furnishes full sheets of material in new condition.
Danny Walker
Walker Manufacturing
Tishomingo, Oklahoma USA
www.walkermfg.net
beefy
4.5 Star Member
4.5 Star Member
Posts: 1504
Joined: Fri Jan 18, 2013 3:19 am

Re: Need help with quote please

Post by beefy »

Are you drilling or plasma cutting the holes.

If you are plasma cutting them, have you done some test cuts and confirmed with the customer that the hole quality will be acceptable. If the customer decides they want them drilling, that's 600 holes in Hardox 450
2500 x 1500 water table
Powermax 1250 & Duramax torch (because of the new $$$$ync system, will buy Thermal Dynamics next)
LinuxCNC
Sheetcam
Alibre Design 3D solid modelling
Coreldraw 2019
Bscott0008
1/2 Star Member
1/2 Star Member
Posts: 6
Joined: Fri Aug 18, 2017 9:30 am

Re: Need help with quote please

Post by Bscott0008 »

Thanks so much. What do ya'll use for pricing?
Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”