Easyscriber engrave attachment for Hypertherm torch's
 

Advice For Pricing

Learn & share techniques, strategies, and experiences on marketing your plasma cut products in this forum.
Post Reply
Oakleys
Posts: 1
Joined: Thu Mar 08, 2018 1:30 am

Advice For Pricing

Post by Oakleys » Tue Apr 24, 2018 10:30 am

I was wondering what you all would charge for this personalized custom 24 x 24 sign with high quality automobile paint and clear coat. And also with just standard normal paint. Thanks in advance for the help.
miranda.svg
(79.73 KiB) Downloaded 34 times

plasmanewbie
Elite Contributing Member
Elite Contributing Member
Posts: 519
Joined: Thu Jul 24, 2008 11:15 am

Re: Advice For Pricing

Post by plasmanewbie » Tue Apr 24, 2018 2:44 pm

I opened your file but CorelDraw didn't like it. This is what I saw
Capture.PNG
Capture.PNG (10.06 KiB) Viewed 388 times
Maybe someone else can chime in with better success than me. Sorry.

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 567
Joined: Sun Mar 11, 2012 4:40 pm

Re: Advice For Pricing

Post by rdj357 » Tue Apr 24, 2018 2:58 pm

I'd be at $155 in 12 gauge steel with single color, one coat powder coat.

163 pierces and 540 inches of cutting there.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

User avatar
little blue choo
Elite Contributing Member
Elite Contributing Member
Posts: 1445
Joined: Mon Mar 02, 2015 10:38 pm
Location: Cherryville NC
Contact:

Re: Advice For Pricing

Post by little blue choo » Tue Apr 24, 2018 11:14 pm

Never seen a SVG I couldn't open in Inkscape, until now. I just get a black blob

Rick
Rick
Arclight 9600 4x8 table
Hypertherm PM65
Acc. Plate Marker, 4 inch Pipe Cutter, Wood Router package
Quincy Q54 compressor 2 stage, 5hp, 60 gal
Refrigerated air dryer & 4 stage filtration system
Software Mach 3, Sheetcam, Solid Edge 2D, Inkscape

User avatar
rdj357
Elite Contributing Member
Elite Contributing Member
Posts: 567
Joined: Sun Mar 11, 2012 4:40 pm

Re: Advice For Pricing

Post by rdj357 » Wed Apr 25, 2018 9:05 am

I used my vinyl software's import SVG function and then exported a DXF so I could open in Design Edge. Quite a few intersections and crossovers that are probably messing with Inkscape.
Robert Johnson
----- PlasmaCam 5x10 Table -----
FourNinety Creations & Learn PC, LLC

Learn Plasmacam Website
Learn Plasmacam on Facebook
Learn Plasmacam on YouTube

Post Reply

Return to “Pricing, Advertising, & Marketing Your Products Forum”