Easyscriber engrave attachment for Hypertherm torch's
 

Mag Brake

Post Reply
KIDTech
Posts: 359
Joined: Tue Oct 28, 2014 1:21 pm

Mag Brake

Post by KIDTech » Tue May 17, 2016 1:57 pm

I am looking hard at this tool offered by Baileigh for the shop, anyone have one they'd like to give feedback on? It would be much appreciated.
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill

User avatar
acourtjester
Elite Contributing Member
Elite Contributing Member
Posts: 3486
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Mag Brake

Post by acourtjester » Tue May 17, 2016 2:18 pm

ask your question here http://weldingweb.com/index.php
there has been some talk about them there.
DIY 4X4 Plasma/Router Table
CandCNC DTHC-IV & Feather Touch
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PM 256 tig

comeoutswingin
Elite Contributing Member
Elite Contributing Member
Posts: 126
Joined: Fri Oct 16, 2009 10:34 pm

Re: Mag Brake

Post by comeoutswingin » Tue May 17, 2016 6:24 pm

I went through 3 machines before they operated partially correct.. the first ones would not clamp material. The final one, and the one I just said ok, enough is is enough was the one I still have...

I will say this, the one I have now, clamps and bends correct, but something is screwed up in the foot pedal because the pedal is HOT, and when I mean hot, it doesn't function but it will shock the living shit out of you, So its disconnected.

Cool tool for sure, but, Baileigh.. meh. They tried to make it right but it took multiple times to just get close.
5x10 LDR

KIDTech
Posts: 359
Joined: Tue Oct 28, 2014 1:21 pm

Re: Mag Brake

Post by KIDTech » Tue May 17, 2016 10:11 pm

Well that is upsetting.
DIY 5x10 v rail, rack and pinion
Gecko g540
Pm65 - aka game changer
Longevity ForceCut 42i is sitting on the shelf
Proma THC
ACAD, SheetCam, Mach3
Millermatic 211
NEW HORSE IN THE STABLE:
4'x8' LDR downdraft w/a scribe
Milltronics Partner 2 CNC mill

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1456
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Mag Brake

Post by tnbndr » Wed May 18, 2016 7:29 am

I don't own one but have used them in my career. They are not all they are cracked up to be. I would use that money towards something better built and usefull for other things.
They have been discussed over on Pirate 4x4 forum, you can search there.

Heres the link
http://www.pirate4x4.com/forum/shop-too ... brake.html
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 215
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

Post Reply

Return to “Metal Bending, Rolling, Notching, Drilling, Saw Cutting”