Easyscriber engrave attachment for Hypertherm torch's

6'' Velox z axis side plates

Share and learn with other DIY members who have built their own plasma tables and accessories.
Post Reply
User avatar
Elite Contributing Member
Elite Contributing Member
Posts: 813
Joined: Thu Aug 01, 2013 11:50 am
Location: Co Kerry, Ireland

6'' Velox z axis side plates

Post by SeanP » Mon May 09, 2016 4:46 pm

I made these up as I was noticing a bit of flex in the back plate of the z axis, adding these cured that all together.

You might notice I have fitted a extra linear bearing on the lower part, I was just starting to feel a little play in the original so squeezed another bearing on either side, it's been like that for 12 months now, just oil and clean fairly often.
It was just a cheapo chinese bearing I had, don't think it's any different quality to what velux supplied.

Link here to diy breakaway mount fitted also

Z axis side supports.DXF

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here

Powermax 45 with Duramax torch.
Home built table, Candcnc DTHC 2, Dragoncut 620-4
R-Tech 210 Tig, Jasic 250 mig
Sheetcam, Scanything, Coreldraw X8, Solidworks
Table build gallery

User avatar
Elite Contributing Member
Elite Contributing Member
Posts: 1016
Joined: Fri Sep 13, 2013 8:42 am
Location: Washington D.C. Metro

Re: 6'' Velox z axis side plates

Post by Capstone » Mon May 09, 2016 7:20 pm

Thanks Sean
It's all relative...
CNC Metal Design
Instagram CNC Metal Design
JD Squared 4x8
HT PM45, Miller 251 MIG

Post Reply

Return to “DIY Plasma Table & Accessory Discussion Forum”