Contact/Drag Nozzles for Tomahawk 625

Information on plasma cutting nozzles, electrodes, and other consumables.
Post Reply
Laggy
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat May 15, 2021 6:32 pm

Contact/Drag Nozzles for Tomahawk 625

Post by Laggy »

So I just got a Tomahawk 625. I want some drag/direct contact nozzles. BUT, they’re rated for 25A and 40A, where as stand-off type are 40A.

Is there any drawback to using just the 40A even if I’m running thinner gauge and lower amperage?
robertspark
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1801
Joined: Mon Jun 12, 2017 6:43 pm

Re: Contact/Drag Nozzles for Tomahawk 625

Post by robertspark »

wider kerf imo
Laggy
1/2 Star Member
1/2 Star Member
Posts: 3
Joined: Sat May 15, 2021 6:32 pm

Re: Contact/Drag Nozzles for Tomahawk 625

Post by Laggy »

Thanks!
Post Reply

Return to “Plasma Consumables”