consumables for ag60 sg55 torch

Information on plasma cutting nozzles, electrodes, and other consumables.
Post Reply
zultek
Posts: 8
Joined: Mon Jun 10, 2019 7:04 pm
Location: Medina,New York

consumables for ag60 sg55 torch

Post by zultek » Sat Mar 27, 2021 7:28 pm

Hello- I have a simadre 60sp that uses a ag60 sg55 torch. I want to find some tips for fine cutting and don't see any options. Please let me know some options, also can I use a different torch style as my torch only has a 2 pin trigger connector a air hose and a red wire for arc voltage. any ideas would be nice
Thanks

weldguy
Elite Contributing Member
Elite Contributing Member
Posts: 733
Joined: Fri Apr 17, 2009 11:48 am

Re: consumables for ag60 sg55 torch

Post by weldguy » Mon Mar 29, 2021 11:52 am

I am not at all familiar with your plasma, you may be best to contact the manufacturer and ask if they offer a tip for fine cutting.

Why are you wanting to replace the torch? Sounds like your torch has all the wires you need.

zultek
Posts: 8
Joined: Mon Jun 10, 2019 7:04 pm
Location: Medina,New York

Re: consumables for ag60 sg55 torch

Post by zultek » Sun Apr 04, 2021 12:22 pm

Hello- was looking for a torch that uses fine cut tips my torch is good but the hole in tip is 0.055 dia. and trying to made a smaller kerf thanks

Greolt
Elite Contributing Member
Elite Contributing Member
Posts: 105
Joined: Mon May 18, 2015 12:36 am

Re: consumables for ag60 sg55 torch

Post by Greolt » Sun Apr 04, 2021 4:56 pm

Nozzles can be had in 0.9, 1.0 and 1.2 for that style torch.

I use 0.9 mostly.

zultek
Posts: 8
Joined: Mon Jun 10, 2019 7:04 pm
Location: Medina,New York

Re: consumables for ag60 sg55 torch

Post by zultek » Mon Apr 05, 2021 6:26 pm

Hello- Where do you buy the nozzles
Thanks

Greolt
Elite Contributing Member
Elite Contributing Member
Posts: 105
Joined: Mon May 18, 2015 12:36 am

Re: consumables for ag60 sg55 torch

Post by Greolt » Mon Apr 05, 2021 7:30 pm


zultek
Posts: 8
Joined: Mon Jun 10, 2019 7:04 pm
Location: Medina,New York

Re: consumables for ag60 sg55 torch

Post by zultek » Sat Apr 10, 2021 5:32 pm

Thanks for the info

mechanic416
Posts: 7
Joined: Sun Dec 29, 2019 9:23 am

Re: consumables for ag60 sg55 torch

Post by mechanic416 » Mon Apr 19, 2021 12:08 pm

0.9mm/40 amp tips are the smallest you will find for that torch.

Post Reply

Return to “Plasma Consumables”

Industry Pros use FastCut CNC