Image
To close this announcement click the X in the top right corner.
Industry Pros use FastCut CNC

Worn Finish

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
Post Reply
cfmetalworks
1 Star Member
1 Star Member
Posts: 19
Joined: Wed Jan 11, 2017 6:31 pm

Worn Finish

Post by cfmetalworks » Mon Nov 06, 2017 12:51 pm

Does any know how to do a finish like this? Have a customer wanting a finish like this on their table.
Would you just paint a red base coat and brush the black on?

Thanks!

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here


User avatar
East German
3.5 Star Elite Contributing Member
3.5 Star Elite Contributing Member
Posts: 563
Joined: Sat Jan 05, 2013 8:21 am
Location: Stapelburg Germany

Re: Worn Finish

Post by East German » Mon Nov 06, 2017 3:19 pm

Great Work!!!

Peter
Sorry for my language! The last English class was in 1982.

Homemade CNC Plasma-Watertable
MyPlasmCNC
Hypertherm Powermax 85
Machine Torch
Hypertherm Powermax 1100
Machine Torch

User avatar
tnbndr
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1573
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Worn Finish

Post by tnbndr » Mon Nov 06, 2017 7:15 pm

I would do a black base coat, then red over the black and sand to get the effect of worn.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
16.9scfm@100psi, 16.0scfm@175psi
Miller 215
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
http://ikescreations.com

cfmetalworks
1 Star Member
1 Star Member
Posts: 19
Joined: Wed Jan 11, 2017 6:31 pm

Re: Worn Finish

Post by cfmetalworks » Mon Nov 06, 2017 11:04 pm

Thanks for the reply tnbndr! That makes since I don't know why I didn't think of that lol.

Bobkovacs
2.5 Star Member
2.5 Star Member
Posts: 101
Joined: Sun Aug 18, 2013 8:47 pm

Re: Worn Finish

Post by Bobkovacs » Tue Nov 07, 2017 7:10 am

Look up a channel called "ZH Fabrications" on Youtube- he's done a few pieces with that finish. He sprays the red and then scrapes some of it off before it's fully dried, and follows it with a brown/black stain.

cfmetalworks
1 Star Member
1 Star Member
Posts: 19
Joined: Wed Jan 11, 2017 6:31 pm

Re: Worn Finish

Post by cfmetalworks » Mon Feb 19, 2018 5:01 pm

bobkovacs - sorry for the late reply but I just saw your post. Thanks for that video it helps out a lot!!

Post Reply

Return to “Paint & Other Top Coats”

Industry Pros use FastCut CNC