It is currently Fri Nov 16, 2018 7:59 pm

 

Worn Finish

Learn and share top coat finishing techniques, experiences, and product knowledge here. Paint, anodize, rubber coating, etc.
cfmetalworks
Posts: 19
Joined: Wed Jan 11, 2017 6:31 pm

Worn Finish

Postby cfmetalworks » Mon Nov 06, 2017 12:51 pm

Does any know how to do a finish like this? Have a customer wanting a finish like this on their table.
Would you just paint a red base coat and brush the black on?

Thanks!

You do not have access to download this dxf file.
Become a Contributing Member to gain access to the thousands of files shared by our members. Click Here


User avatar
East German
Elite Contributing Member
Elite Contributing Member
Posts: 405
Joined: Sat Jan 05, 2013 8:21 am
Location: Stapelburg Germany

Re: Worn Finish

Postby East German » Mon Nov 06, 2017 3:19 pm

Great Work!!!

Peter
Sorry for my language! The last English class was in 1982.

Homemade CNC Plasma-Watertable with Mach 3
Triple Beast + Leadschine Drive
Hypertherm Powermax 85
Machine Torch + PriceCNC THC
Hypertherm Powermax 1100
Machine Torch + Proma THC

User avatar
tnbndr
Elite Contributing Member
Elite Contributing Member
Posts: 1414
Joined: Mon Jan 09, 2012 4:30 pm
Location: New Berlin, WI
Contact:

Re: Worn Finish

Postby tnbndr » Mon Nov 06, 2017 7:15 pm

I would do a black base coat, then red over the black and sand to get the effect of worn.
Dennis
LDR 4x8, Scribe, DTHCIV
PM45
DeVilbiss Air America 6.5HP, 80Gal., 175psi, Two Stage
[email protected], [email protected]
Miller 211
RW 390E Slip Roll
AutoCAD, SheetCAM, Mach 3
https://www.facebook.com/ikescreations?ref=hl
http://ikescreations.com

cfmetalworks
Posts: 19
Joined: Wed Jan 11, 2017 6:31 pm

Re: Worn Finish

Postby cfmetalworks » Mon Nov 06, 2017 11:04 pm

Thanks for the reply tnbndr! That makes since I don't know why I didn't think of that lol.

Bobkovacs
Posts: 101
Joined: Sun Aug 18, 2013 8:47 pm

Re: Worn Finish

Postby Bobkovacs » Tue Nov 07, 2017 7:10 am

Look up a channel called "ZH Fabrications" on Youtube- he's done a few pieces with that finish. He sprays the red and then scrapes some of it off before it's fully dried, and follows it with a brown/black stain.

cfmetalworks
Posts: 19
Joined: Wed Jan 11, 2017 6:31 pm

Re: Worn Finish

Postby cfmetalworks » Mon Feb 19, 2018 5:01 pm

bobkovacs - sorry for the late reply but I just saw your post. Thanks for that video it helps out a lot!!


Return to “Paint & Other Top Coats”

Who is online

Users browsing this forum: No registered users and 1 guest

Easyscriber engrave attachment for Hypertherm torch's