Powder Type Question

Learn and share powder coating techniques, experiences, and product knowledge here.
Post Reply
sodfarmer
2.5 Star Member
2.5 Star Member
Posts: 170
Joined: Sun Dec 19, 2010 2:54 pm
Location: Van Wert, Iowa

Powder Type Question

Post by sodfarmer »

I had a customer ask if there was a powder coat that would act like blackboard? I did some research and couldn't find anything, thought maybe someone has run across this before?

Thanks,
John
User avatar
NDS
1 Star Member
1 Star Member
Posts: 12
Joined: Fri Sep 14, 2012 1:31 pm
Contact:

Re: Powder Type Question

Post by NDS »

Havent looked into it to much but just saw an add from powder buy the pound showing a powder they are calling white board. Not sure if it will help but it may be worth looking into
Precision Plasma 4x4 table
CandCNC electronics
Powermax 45 with hand torch
4x4x8 powder coat oven
http://www.kodiakmetalworks.com

Image
User avatar
NDS
1 Star Member
1 Star Member
Posts: 12
Joined: Fri Sep 14, 2012 1:31 pm
Contact:

Re: Powder Type Question

Post by NDS »

Guess I should have looked at the post date.......maybe it will help someone either way
Precision Plasma 4x4 table
CandCNC electronics
Powermax 45 with hand torch
4x4x8 powder coat oven
http://www.kodiakmetalworks.com

Image
sodfarmer
2.5 Star Member
2.5 Star Member
Posts: 170
Joined: Sun Dec 19, 2010 2:54 pm
Location: Van Wert, Iowa

Re: Powder Type Question

Post by sodfarmer »

Thanks for the info. I'll check with them.
Post Reply

Return to “Powder Coat”