Glow in the Dark Powder Coat....?

Learn and share powder coating techniques, experiences, and product knowledge here.
Post Reply
large_time
2.5 Star Member
2.5 Star Member
Posts: 167
Joined: Thu Dec 13, 2012 9:01 am

Glow in the Dark Powder Coat....?

Post by large_time »

Anybody had luck with this?

I am looking to do a few pieces that would be cool if they were glow in the dark green.

I read alot this morning on a few otehr forums that all were essentially dissapointed with the results.

Would like to hear if anyone here has personal experience with using it...

Its fairly expensive to just "try" it... I may end up doing that but would rather see if there are any experts or good advice here.

Thanks!
Large Time Fabrication

WWW.Facebook.com/LargeTimeFab

"Life is Short, Live it Large"
wickedinhere
4 Star Member
4 Star Member
Posts: 751
Joined: Thu Jun 09, 2011 9:03 pm

Re: Glow in the Dark Powder Coat....?

Post by wickedinhere »

I did a piece for a customer that wanted his address numbers to glow at night. I used the additive that you put in the powder coat and it worked pretty good, i used it in a white powder. Its kinda pricy i got it from powder buy the pound.
large_time
2.5 Star Member
2.5 Star Member
Posts: 167
Joined: Thu Dec 13, 2012 9:01 am

Re: Glow in the Dark Powder Coat....?

Post by large_time »

Thanks so much!
Large Time Fabrication

WWW.Facebook.com/LargeTimeFab

"Life is Short, Live it Large"
Patrick Waite
2.5 Star Member
2.5 Star Member
Posts: 239
Joined: Sun May 16, 2010 3:28 am

Re: Glow in the Dark Powder Coat....?

Post by Patrick Waite »

columbia powder sells glow in the dark power. It really not that much in price
Patrick
Post Reply

Return to “Powder Coat”