Image
AUGUST EasyScriber Giveaway!
Industry Pros use FastCut CNC

Removing powder coat

Learn and share powder coating techniques, experiences, and product knowledge here.
Post Reply
OTHill
3 Star Elite Contributing Member
3 Star Elite Contributing Member
Posts: 506
Joined: Fri Jul 20, 2012 12:08 pm

Removing powder coat

Post by OTHill » Fri Mar 04, 2022 1:07 pm

The most amazing powder coat remover lifts it in minutes.
16464171841881164959584245791315.jpg

You do not have access to view or download this file.
Become a Contributing Member to gain access to this feature. Click Here

5x10 table,Precision plasma gantry,Cand CNC electronics,Hypertherm 65 plasma,King lathe and mill,255 lincoln mig welder.Dawson Creek BC. Much modified Fastcut 4x8 plasma table with Ethercut

weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1220
Joined: Fri Apr 17, 2009 11:48 am

Re: Removing powder coat

Post by weldguy » Fri Mar 04, 2022 3:06 pm

Wow! I was just thinking the other night that I needed something to remove old powder, going to burn out my compressor trying to sandblast it off. This is a priceless tip and VERY much appreciated. I was just going to start searching for something, will order some of this. Thank you!

User avatar
Joe Jones
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1571
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Removing powder coat

Post by Joe Jones » Mon Mar 07, 2022 11:49 pm

It occurs to me that this stuff MIGHT be awesome for removing GRAFFITI as well!

Joe
Samson 510
PlasmaCam DH2 4x4
X-Tool D! PRO Laser
50 Watt Galvo Laser
FREE DesignEdge Online Training

It is more fun when it isn't necessary!

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 6370
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Removing powder coat

Post by acourtjester » Thu May 12, 2022 7:40 pm

Looks like very limited locations to buy, no eBay or Amazon
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT

User avatar
Joe Jones
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1571
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Removing powder coat

Post by Joe Jones » Thu May 12, 2022 8:51 pm

I think I’m going to buy a can anyway and try it on graffiti just to see if it does what I think it will do. If it does I’ll buy a couple of cases of it and carry it around in my truck with me and go on my own personal war against graffiti!

Joe



.
Samson 510
PlasmaCam DH2 4x4
X-Tool D! PRO Laser
50 Watt Galvo Laser
FREE DesignEdge Online Training

It is more fun when it isn't necessary!

plasmanewbie
4.5 Star Elite Contributing Member
4.5 Star Elite Contributing Member
Posts: 1919
Joined: Thu Jul 24, 2008 11:15 am

Re: Removing powder coat

Post by plasmanewbie » Fri May 13, 2022 10:16 am

acourtjester wrote:
Thu May 12, 2022 7:40 pm
Looks like very limited locations to buy, no eBay or Amazon
I had some difficulty finding it also. Seems it goes by a couple of different names. I ended up buying some from Grainger and it was called Chisel Gasket Remover but when it delivered the can said SF 790 just like OTHills. Haven't tried it yet but def look at Grainger and don't be fooled by the name :Like

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 6370
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Removing powder coat

Post by acourtjester » Fri May 13, 2022 10:41 am

thanks :Like :Like
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT

adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 5211
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Removing powder coat

Post by adbuch » Sat May 14, 2022 1:51 am

OTHill wrote:
Fri Mar 04, 2022 1:07 pm
The most amazing powder coat remover lifts it in minutes.16464171841881164959584245791315.jpg
I wish I had known about that several years ago. The powder coater for to mask off part of the brake pedal assembly for the 1940 Ford hot rod I was building and I had to grind it off for clearance. I probably spent over an hour messing around with it. The only thing I would say is that one needs to very thoroughly mask off any areas where you don't want the powder coat removed so it doesn't get on a good surface by mistake.

But a great product, and thanks for sharing that with us.

David

weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1220
Joined: Fri Apr 17, 2009 11:48 am

Re: Removing powder coat

Post by weldguy » Mon Jul 25, 2022 11:34 am

Ok finally got an opportunity to try this Loctite SF 790 for stripping powder coat. WOW!!! All i can say is WOW!!! I sprayed a little on and within seconds the powder coat blistered and wiped right off!! Would have taken me 30 minutes to sandblast this part but this stuff stripped in 2 minutes. Highly recommend :Like :Like I still sandblasted the part after just to get a fresh clean surface for the new powder to bite onto but this stuff saved me so much time and effort. Thanks to OTHill for the tip :Like

User avatar
acourtjester
6 Star Elite Contributing Member
6 Star Elite Contributing Member
Posts: 6370
Joined: Sat Jun 02, 2012 6:04 pm
Location: Pensacola, Fla

Re: Removing powder coat

Post by acourtjester » Mon Jul 25, 2022 1:41 pm

Thanks for verification feedback always great when a product works as stated. :Like :Like
DIY 4X4 Plasma/Router Table
Hypertherm PM65 Machine Torch
Drag Knife and Scribe
Miller Mig welder
13" metal lathe
Small Mill
Everlast PowerTig 255 EXT

User avatar
Joe Jones
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1571
Joined: Sat Oct 11, 2014 2:33 pm
Location: Franklin, KY., USA
Contact:

Re: Removing powder coat

Post by Joe Jones » Mon Jul 25, 2022 5:16 pm

I have not experimented with removing powder coating. Would MEK work? What about Acetone? Has anyone tried Super Strength OVEN CLEANER? I have used that to remove graffiti from walls. The results depend heavily on what kind of spray paint was used. Some falls off, while other paints laugh at oven cleaner. The SF 790 is a powerful paint stripper, so maybe that is why it can remove powder coat so well. I would have the irresistible urge to spray it onto an old car hood, just to see what it would do to the paint. Maybe jealous girlfriends already know about this. :lol: Every job has a tool.

Joe


.
Samson 510
PlasmaCam DH2 4x4
X-Tool D! PRO Laser
50 Watt Galvo Laser
FREE DesignEdge Online Training

It is more fun when it isn't necessary!

weldguy
4 Star Elite Contributing Member
4 Star Elite Contributing Member
Posts: 1220
Joined: Fri Apr 17, 2009 11:48 am

Re: Removing powder coat

Post by weldguy » Tue Jul 26, 2022 4:32 pm

Joe Jones wrote:
Mon Jul 25, 2022 5:16 pm
I have not experimented with removing powder coating. Would MEK work? What about Acetone? Has anyone tried Super Strength OVEN CLEANER? I have used that to remove graffiti from walls. The results depend heavily on what kind of spray paint was used. Some falls off, while other paints laugh at oven cleaner. The SF 790 is a powerful paint stripper, so maybe that is why it can remove powder coat so well. I would have the irresistible urge to spray it onto an old car hood, just to see what it would do to the paint. Maybe jealous girlfriends already know about this. :lol: Every job has a tool.

Joe
After using this stuff Joe I wouldn't waste my time on anything else. I can't remember the last time i tried something and it worked far beyond my expectations, typically it's a bitter disappointment so this was a real treat. Honestly it is worth having on your shelf and I just ordered mine from Grainger online after reading the OTHill's original post, been sitting here for months and just had an opportunity to try it. Thrilled! Thanks for the tip OTHill :Yay :Yay

adbuch
5.5 Star Elite Contributing Member
5.5 Star Elite Contributing Member
Posts: 5211
Joined: Thu Sep 21, 2017 5:22 pm
Location: Tucson, Arizona
Contact:

Re: Removing powder coat

Post by adbuch » Tue Jul 26, 2022 6:29 pm

weldguy wrote:
Tue Jul 26, 2022 4:32 pm


After using this stuff Joe I wouldn't waste my time on anything else. I can't remember the last time i tried something and it worked far beyond my expectations, typically it's a bitter disappointment so this was a real treat. Honestly it is worth having on your shelf and I just ordered mine from Grainger online after reading the OTHill's original post, been sitting here for months and just had an opportunity to try it. Thrilled! Thanks for the tip OTHill :Yay :Yay
:Like :Like :Like

Post Reply

Return to “Powder Coat”

Industry Pros use FastCut CNC