Help with Inkscape - Line Width
-
- 1.5 Star Member
- Posts: 39
- Joined: Sun May 14, 2017 7:59 pm
Help with Inkscape - Line Width
I down loaded a DXF file to inscape and the lines are very thick causing overlap and distorting the drawing. Is there a way to thin the lines so i can manipulate the drawing?? Thanks..
-
- 4 Star Elite Contributing Member
- Posts: 1979
- Joined: Fri Apr 17, 2009 11:48 am
Re: Help with Inkscape
Press Shift+Ctrl+F to open the Fill and Stroke window, then click on Stroke Style tab at the top of that window. In there you can change the Width. Hope that helps!
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: Help with Inkscape - Line Width
I purchased Q-Cad its very cheap! The only thing that I use it for is opening a dxf and converting it to an svg. I can then open it in inkscape. Just be careful to resize it when you upload it to inkscape.
-
- 2.5 Star Member
- Posts: 186
- Joined: Tue Apr 17, 2018 2:36 pm
Re: Help with Inkscape - Line Width
Sorry, Didn't realize how old this post was!